Instruction manual

A-2 A-61601 June 2010
System requirements Following is the minimum recommended system configuration to run
the Kodak Picture Saver Scanning System:
• 3.2 GHz processor, 250 MB free hard disk space,
1 GB RAM for 300 dpi (2 GB for Windows 7) or 3 GB RAM for 600
and 1200 dpi (4 GB for Windows 7)
• Two USB 2.0 ports
(1 for the scanner, 1 for the USB software dongle)
• Supported operating systems. All operating systems must support
USB 2.0 with administrator privileges for installation:
- Microsoft Windows XP, Service Pack 3
- Windows Vista, Service Pack 3
- Windows Vista, 64-bit, Service Pack 2
- Windows XP 64, Service Pack 2
- Windows 7, 32-bit
- Windows 7, 64-bit
• The Kodak Picture Saver Scanning System is not officially supported
on non-native Windows PCs including running Windows operating
system in a virtual machine or dual boot. Only limited technical
support is available for these environments with no guarantees.
• Microsoft .NET Framework 2.0 (included on the Installation CD)
• Internet connection for Product Registration
NOTE: Depending on how you want to manage the images after
scanning, you will need supporting devices such as; CD/DVD
Writer, photo printer, etc.
Power Consumption -
Scanner
Off mode: <4 watts
Running: <46 watts
Power Consumption -
with A3 Flatbed
Off mode: <
6 watts
Running: <65 watts
Power Consumption -
with A4 Flatbed
Off mode: <
6 watts
Running: <57 watts
Acoustic Noise
(Sound Pressure level)
Operating: less than 58 dB(A)
Off mode: less than 30 dB(A)
Bundled Software Kodak Picture Saver System Software
SmartTouch Functionality