KODAK PIXPRO FZ45 DIGITAL CAMERA User Manual i
BEFORE YOU START Declaration of Conformity Responsible Party: JK Imaging Ltd. Address: JK Imaging Ltd., 17239 So. Main Street, Gardena, CA 90248 USA Company website: kodakpixpro.com For Customers in the USA Tested to Comply with FCC Standards FOR HOME OR OFFICE USE This device complies with part 15 of the FCC Rules.
About this Manual Thank you for purchasing this KODAK PIXPRO Digital Camera. Please read this manual carefully and keep it in a safe place for future reference. JK Imaging Ltd. reserves all rights of this document. No part of this published manual may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form, by any means, without the prior written permission of JK Imaging Ltd.
SAFETY NOTES Safety Notes for this Camera Do not drop the camera or allow it to hit solid objects. Do not attempt to disassemble or repair the camera. Do not use or store the camera in dusty places or on a beach to help prevent dust or sand from entering the camera, causing possible damage. Do not use or store the camera in a hot environment or in direct sunlight. Do not use or store the camera near powerful magnetic fields, for example near a magnet or transformer. Avoid touching the lens of the camera.
Safety Notes for Battery If battery fluid leaks inside the camera, contact our customer service department immediately. If battery fluid leaks onto your skin, rinse your skin with clean water and seek immediate medical attention. Disposal of used batteries should be carried out in accordance with your local (national or regional) regulations. To prevent the battery from being damaged, do not drop the battery or allow it to hit solid objects or to be scratched by foreign objects.
Safety Notes for Memory Cards We highly suggest buying only well-known, name brand memory cards to ensure peak performance and reliability. Format the memory card using the camera before you use it or insert a new one. Do not drop the memory card or allow it to hit solid objects to avoid damaging it. Do not attempt to disassemble or repair the memory card. Do not expose the memory card to water. Always keep it dry. Do not remove the memory card when the camera is turned on.
Other Safety Notes Do not disconnect the power or turn the camera off during the update process. Doing so may cause incorrect data to be written and the camera may not power on later. Do not hang the neck or wrist strap of the camera around the neck of a child. When using your camera on an airplane, observe the relevant rules specified by the airline and FAA regulations. Due to the limitations of manufacturing technology, the LCD may have a few dead or bright pixels.
WARNING Altering, tampering or modifying the any parts of FZ45 camera is unauthorized and will void the manufacturer’s warranty and “could” void Federal and/or State Compliance. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
CONTENTS BEFORE YOU START.......................... 1 MODE OVERVIEW............................ 19 SAFETY NOTES................................. 3 Display Setting................................................. 19 CONTENTS........................................ 8 GETTING STARTED........................... 12 Accessories Included....................................... 12 Overview of the Screen Icons in Photo Shooting Mode................................ 20 Overview of the Screen Icons in Movie Mode...
BASIC OPERATION........................... 29 Photos and Video Deletion.............................. 39 Using the Zoom Function................................ 29 USING THE MENUS.......................... 40 Macro Mode..................................................... 30 Photo Menu...................................................... 40 Self-timer Setting............................................. 31 Flash Mode.......................................................
AF Assist Beam........................................... 47 Digital Zoom............................................... 47 Date Imprint............................................... 48 Quick Review............................................. 48 Face Detection........................................... 48 Movie Menu...................................................... 49 Expo Metering (Exposure Metering) Video Quality Color Effect .......................... 49 ..................................... 50 .
Connecting to a Computer....................... 63 Connecting to a Printer............................. 64 File Settings ............................................. 66 Format ....................................................... 67 Copy to Card.............................................. 67 File Numbering........................................... 68 Reset........................................................... 68 Firmware (FW) Version............................... 68 APPENDICES................
GETTING STARTED Accessories Included Your camera box should contain the camera model you purchased along with the following accessories. If anything is missing or appears to be damaged, please contact your retailer first or our customer service center.
Part Names 1 2 3 7 8 9 10 11 12 13 14 15 16 6 5 22 23 4 1 Flash Lamp 8 LCD 16 Strap Eyelet 2 AF Assist Beam/ Self-timer Lamp 9 Power Button 17 [ 21 17 18 20 19 ] Display Button/Arrow Button (Up) 10 Quick Video Recording Button 18 [ 11 Indicator Lamp 19 [ ] Delete Button/Self-timer Button/ Arrow Button (Down) 4 Microphone 12 Shutter Button 20 [ 5 Tripod Socket 13 Zoom Button 21 SET Button 6 Battery Cover 14 Micro USB Port 22 Mode Button 7 Speaker 15 Playback Button 23 Menu
Installing Battery and Memory Card 1. Open the battery cover door. 2. Insert the battery into the battery slot in the correct direction as shown in the following diagram. 3. Insert the memory card into the memory card slot as shown in the diagram below: Write Protection Toggle Switch A memory card (SD/SDHC/SDXC) is optional and not included in all camera packaging. It needs to be purchased separately. Please use an original memory card which is Class 10 or higher and has a capacity of 4GB to 512GB.
4. Close the battery cover door. Turning Camera On and Off Press the Power button to turn the camera on. To turn the camera off, press the Power button again. Power Button When the power is off, press and hold the play button to power on and enter Playback mode.
How to Take Pictures 1. Hold the camera with both hands, being careful to not block the flash and lens with fingers. 2. Point the lens toward the object you want to take a picture of, and then frame it with the LCD. 3. Use the Zoom button to select Tele or Wide positions to zoom in or out on your subject. 4. Press the shutter button halfway down to focus on the subject. When the focus frame turns green, press the shutter button all the way down to completely to take the picture.
Resetting your Language After you set your language for the first time, follow the instructions below to reset your desired language. button and press the [ 1. Press the enter the menu. ]/[ ] buttons to select 2. Press the [ ]/[ ] buttons to select 3. Press the [ menu. ]/[ ] buttons to select [Language] and press the ]/[ 4. Press the [ button to confirm. 5. Press the ]/[ ]/[ , and press the /[ . Press the button to ] button to enter the menu.
Resetting Date/Time After you set your Date/Time for the first time, follow the instructions below to reset date and time. button and press the [ 1. Press the enter the menu. ]/[ ] buttons to select 2. Press the [ ]/[ ] buttons to select , and press the /[ 3. Press the [ the menu. ]/[ ] buttons to select [Date & Time] and press the . Press the button to ] button to enter the menu. /[ ] button to enter Date & Time Sound Settings Power Saver Language H-M Auto English World Time 2022 . 03 .
MODE OVERVIEW Display Setting Press the [ ] button to display the settings: Classic, Full, Off. Classic: Displays the camera parameters on screen Full: Camera parameters with Grid and Histogram SD x3.5 SD x3.5 1234 1234 00:56:00 F2.9 15 -0.3 EV 400 ISO 00:56:00 F2.9 15 -0.
LCD Screen Display Overview of the Screen Icons in Photo Shooting Mode 1 2 3 4 5 6 7 8 1234 9 10 11 1 Self-timer 20 SD x3.5 00:56:00 F2.9 15 -0.
Overview of the Screen Icons in Movie Mode SD x3.5 SD IN 00:56:00 -0.3 EV 1 Zoom Display 5 Self-timer 2 Movie Mode 6 Memory Card/Built-In Memory 10 Remaining Recording Time 9 Focus Frame 3 Expo Metering 7 Battery Status 11 Video Quality 4 Macro Mode 8 Color Effect 12 Exposure Compensation (EV Value) For optimal video recording, it is recommended that an SDHC or SDXC memory card be used. Optical Zoom and Digital Zoom can be adjusted (24X in total).
Overview of the Screen Icons in Playback Mode 1/45 SD x2 2015 10-25 15:37 22 1 File Protection 7 Memory Card/Built-in Memory 2 DPOF File 8 Battery Status 3 HDR 9 Zoom Magnification Area 4 Touch-up 10 Image Zone 5 Display Mode 11 Image Zoom Ratios 6 Memory space (indicating the current number of photos and total number of photos) 12 Shooting Date
Using the Mode Button This camera provides a convenient Mode button that allows you to switch easily between different to enter the Mode Selection Menu, press the [ ]/[ ] modes. After pressing the Mode button button to choose the desired mode. Press the button to confirm your selection. Scene Mode Panorama Auto Mode Auto Mode is the most common and easiest mode to take photos.
Movie Mode Switch to this mode to record videos. Scene Mode You can press the [ ]/[ ] button to select your desired scene from the 14 preset modes according to the type of environment you are shooting in, and press the button to confirm your selection. The camera then automatically configures the most appropriate settings for the best possible photos. Auto Scene Sunset ASCN The camera can intelligently detect different environments and automatically select the best scene and photo settings for you.
Backlit Portrait When the sun or any other light source is behind the target you want to shoot, this mode automatically adjusts the foreground exposure to produce the best pictures possible. Macro Mode The macro setting is ideal for shooting small objects or extreme close-up photos. Night Landscape Mode For night scenes, this mode automatically increases the ISO value to compensate for low light. Portrait Mode Most suitable for capturing people with focus on their faces.
Night Portrait For portraits against night scenery. Portrait The camera is set to automatically adjust exposure for realistic capture of skin tones. Children Turns flash off automatically. Avoids disturbing the subject and is suitable for taking photos of children. Landscape For landscapes and outdoor shots. Vivid reproduction of greens and blues. Sunset For sunsets. Captures subjects in strong sunlight. Fireworks For fireworks at night.
Panorama Mode With Panorama Mode, you can take a series of pictures which will be automatically stitched into an ultra-wide panoramic (up to 180°) picture by the camera. 1. Press the arrow buttons to select a desired shooting direction. Should you not select a direction, the default shooting direction is “left to right”. 2 seconds later, the camera will be ready to take pictures. You can also press the button or press the shutter button halfway down to get ready to take panoramic pictures. 2.
In the process of shooting in Panorama Mode, when the LCD shows “Improper alignment. Please try again”, it means that in the process of the camera moving, the angle is off the green line and stitching cannot be completed. You will have to try again, keeping the LCD image aligned with the green line. In order to guarantee the best shooting effect in Panorama Mode, please keep moving horizontally and keep unnecessary shaking to a minimum.
BASIC OPERATION Using the Zoom Function Your camera is equipped with two types of Zoom Functions: Optical Zoom and Digital Zoom. Press the Zoom button of the camera to zoom in or out on the subject while taking pictures. SD Zoom Indicator x3.5 1234 00:56:00 F2.9 15 -0.3 EV 400 ISO When the optical zoom reaches the threshold as digital zoom, release and turn the zoom button to T to switch between the optical zoom and digital zoom.
Macro Mode The Macro Setting is ideal for shooting small objects or close-up photos. This mode allows you to focus on subjects very close to the camera. 1. Press the [ ] button to enter the Macro Menu. Macro Off 2. Press the [ ]/[ ] buttons to select the following 2 modes: Macro Off Select this option to disable Macro. Macro On Select this option to focus on subjects 5cm from the lens. 3. Press the 30 button to confirm the settings and exit the menu.
Self-timer Setting Use this function to take pictures at pre-set intervals. The camera shutter speed can be set to 2 seconds, 10 seconds or Smile Detection. 1. Press the [ ] button to enter the Self-timer Menu. Self-timer Off 2. Press the [ ]/[ following 4 modes: ] buttons to select one of the Self-timer Off Disables the Self-timer. Self-timer 2 sec A single picture is shot 2 seconds after the Shutter Button is pressed.
Flash Mode The flash provides supplemental light for scenes. The flash is usually used when shooting against the light to highlight the object; it is also suitable for metering and shooting in darker scenes to improve the exposure. 1. Press the [ ] button to enter the Flash Settings Menu. Slow Sync. This allows you to take pictures of people at night that clearly show both your subjects and the night time backdrop. The use of a tripod is recommended when shooting with this setting. Slow Sync.
EV Setting Exposure Compensation The EV Function Menu of the camera includes functions, such as EV, Shutter Adjustment and ISO. Using the appropriate Function Settings can improve your pictures. To select the best setting for optimum photos, follow these steps: 1. Press the button to display the Settings screen. 2. Press the [ options. ]/[ ] buttons to select the Setting The adjustable range of exposure value is from EV -3.0 to EV+3.0. ISO F2.8 3. Press the [ option values.
Shutter Adjustment For shutter speed, the camera may automatically set the aperture value corresponding to the manually set shutter speed to obtain the most suitable exposure value. The movement of objects may be shown by adjusting the shutter speed. High shutter value can help you more clearly capture fast moving objects, while low shutter value can better show the movement of objects. Using Quick Recording In the Photo Shooting Mode, press the Fast Video to begin recording video. Recording Button x3.
PLAYBACK Viewing Photos and Videos To view captured photos and video clips on the LCD: 1. After pressing the button, the last photo or video clip taken will be displayed on the LCD. 2. Use the [ ]/[ ] buttons to scroll through the photos or video clips stored on the built-in memory or on the Memory Card in the camera. button to enter the Movie Playback Mode. 3. To play a selected video clip, press the An operation guide appears on the screen when playing back a video.
Thumbnail View When in Playback Mode, press the videos on the screen. on the Zoom button to display thumbnail images of photos and 1. Slide the Zoom button to switch between 3 x 3 and 4 x 4 thumbnails. 2. When a 3 x 3 or 4 x 4 thumbnail is displayed, press the arrow buttons to select the picture or video clip to view. 3. Press the arrow buttons to select a picture or video clip to view and press the original size.
Using Zoom Playback (for still pictures only) When playing back photos, you can also use the Zoom Button to zoom in on the photos, 2 to 8 times their original magnification. 1. Press the [ ]/[ ] buttons to select the picture on which to use the zoom feature. 2. Press the on the Zoom Button to zoom in. 3. The bottom right corner of the screen will display the amount zoomed in as well as the area of the photo shown. x4 4.
Slideshow This setting allows you to view all the stored pictures as a slideshow. 1. Press the 2. Press the 3. Press the [ button to enter playback screen. button to enter slide option. ]/[ ] buttons to select slideshow playing or [Cancel] to return to the playback screen. Play Slide Show Effect 2 Play Slide Show Effect 1 Play Slide Show Effect 2 Play Slide Show Effect 3 4. Press the 38 button to confirm the setting.
Photos and Video Deletion In Playback Mode, press the [ ] button to select your desired photos and videos. To delete photos or videos: 1. Press the button to switch to Playback Mode. 2. Press the [ ]/[ 3. Press the [ ] buttons to select the photos and videos to be deleted. ] button and the deletion screen is displayed. Delete One Exit 4. Press the [ ]/[ ] buttons to select [Delete One] or [Exit] and press the button to confirm. Erased photos/video clips cannot be recovered.
USING THE MENUS Photo Menu Expo Metering (Exposure Metering) Mode: Use this setting to select the “target” size of the camera’s field of view to be metered. 1. In Photo Shooting Mode, press the to enter the Photo Shooting Menu. button 2. Press the [ ]/[ ] buttons to select the Photo Shooting Menu and settings. ([SR 0HWHULQJ $L$( 3. Press the [ ]/[ ] buttons to select the Photo Shooting Menu to be set and press the button to confirm.
Image Size The size setting refers to the image resolution in pixels. A higher image resolution allows you to print that image in larger sizes without degrading the photo image quality. The bigger the number of recorded pixels is, the better the image quality becomes. As the number of recorded pixels lessens, you will be able to record more images on a memory card. Continuous AF 4608x3456 Use the Continuous AF setting to be able to continuously focus automatically when taking pictures. Cont.
Continuous Shot Use this setting to perform continuous shooting. After entering this mode, you can shoot multiple images by continuously holding the shutter button down. Press the shutter button to start continuous shooting. Face Beautifier Skin Soften 30 sec Effect 1 Time-Lapse 30 sec Single Continuous Shot 3 Shots Time-Lapse (30sec/1min/5min/10min) The flash is disabled in Continuous Shot Mode in order to achieve quick succession of shots.
Focus Setting This setting allows you to select different modes for optimum focus. HDR Use this setting to control wide dynamic image range when taking static pictures. Photos with extreme contrast of bright and dark areas will still maintain distinguishable detail and depth. (Suggest using tripod) HDR: Off Object Tracking Single-AF The focus frame appears on the center of the LCD to help you focus on the subject.
White Balance Setting The white balance setting allows you to adjust the color temperature for different lighting scenes to ensure the most accurate color reproduction. Press SET To Enter AWB AWB AWB Incandescent Daylight Manual WB Cloudy Fluorescent Fluorescent CWF 44 (Fully press the Shutter Button to detect the white balance value) Color Temp. (1900K~10000K) Press the [ ]/[ the K value”; Press the [ K value.
Color Effect The image color setting allows you to select different color effects. Press SET To Enter Normal Normal Normal Dreamy Vivid Vignetting Black and White Salon Sepia When HDR or Continuous Shot function is enabled, Dreamy, Vignetting and Salon is not display.
Photo Shoot Settings Menu Scene Select a scene under Scene Mode ( the “Scene Mode” section on page 24. ). Refer to Press SET To Select Scene Pet Mode Press SET To Enter Menu Press the In mode, you can press the [ ] button on the shooting screen to set up Auto shooting. Auto Shooting: On 46 button to enter the menu.
Quality AF Assist Beam The quality setting can be used to adjust the image compression ratio. In a darker environment, the AF assist beam setting can be turned on for better focus. Quality Normal Best Off On Fine AF Assist Beam On On Normal Off Off Best 16M Average File Size: 4.0MB Digital Zoom Fine 16M Average File Size: 2.5MB Normal 16M Average File Size: 2.0MB This setting is for adjusting digital zoom. If this function is disabled, only optical zoom can be used.
Date Imprint Quick Review Include a Date/Time stamp on the photo image. This option allows quick review of the photos immediately after they are taken. Each photo is displayed on the LCD screen based on the selected time. Off Date Date/Time Off Date Imprint 1 sec 2 sec 3 sec Quick Review Face Detection Detects and focuses on faces to make all faces as clear as possible in Photo Mode.
Movie Menu Expo Metering (Exposure Metering) Mode: Use this setting to select the “target” size of the camera’s field of view to be metered. 1. Press the button, select the mode and press the button to enter the Movie Menu. ([SR 0HWHULQJ $L$( Expo Metering: AiAE 2. Press the [ ]/[ the Movie Menu to be set. ] buttons to select 3. Press the [ ]/[ ] buttons to select the Movie Menu to be set and press the button to confirm.
Video Quality Set the image resolution used during video recording. * The longest recording time is 29 minutes at one time. When recording in higher pixel resolutions for extended periods of time, this can cause the camera to generate heat. This is not a camera malfunction. Size: 1080p 30fps Sound recording is disabled when 640x480 120fps is chosen. The speed requirements for reading and writing high resolution image pixel images to an SD card are as follows: No.
Movie Shooting Settings Menu Color Effect The Image Color Setting allows you to select different color effects. Press SET To Enter Menu Normal Press the Normal Vivid button to enter the menu.
AF Assist Beam Digital Zoom In a darker environment, the AF assist beam setting can be turned on for better focus. This setting is for adjusting digital zoom. If this function is disabled, only optical zoom can be used.
Options in the shooting mode (O: Available X: Unavailable) Shooting Modes Options Others O O O O O O O O X O O O O X O O O O X O X X X O X X X X X X O O O X X X O X X O O O O X X X O O X X X X X X X X X X X O O O O X X X X X X X O O O X X O O X X X X O O X X X X X X X X O O O X X X X X X O O O O O O O O O O 53
Playback Menu Display Mode Mode: 1. Press the button to display the playback button to enter the screen and press the menu. Press SET To Confirm Normal Mode: Display all images. Normal Mode Normal Mode: Display all images. Date Mode: Arranged by date. 2. Press the [ ]/[ ] buttons to select the playback desired and press the button to enter. 3. Press the [ ]/[ ] or [ ]/[ buttons to select an option and press the button to confirm.
HDR Touch-up With the HDR function, pictures that are overexposed may be corrected to optimize the highlights and lowlights captured to more accurately represent the actual scene. The playback beauty feature allows for beautification using three individual effects. Red-Eye Reduction HDR Red-Eye Reduction HDR Skin Soften Cancel Eye Brightening After using the HDR function, the image will be saved as a new file and the original file is still stored on the memory card.
Rotate Resize You can use this setting to change the orientation of the picture. This setting allows you to resize a picture to a particular resolution and saves it as a new picture. Turn Right 56 Resize to 1024x768 Turn Right Resize To 1024x768 Turn Left Resize To 640x480 Cancel Cancel Videos and panoramic pictures cannot be rotated. Only for adjusting pictures with high resolution to those with a lower resolution. The rotated picture file will replace the original photo.
Playback Settings Menu Color This setting allows you to change the picture color effect. The file is saved as a new photo and stored in memory together with the original photo. Press SET To Enter Menu Cancel Press the button to enter the menu.
Protect Delete To prevent any pictures or videos from being accidentally erased, use this setting to lock one or all of the files stored on the memory card. You can delete one or all photo/video files. One Delete Protect One Date folder All Date folder All Reset One Lock the selected photo or video if they are unprotected; unlock the selected photo or video if they are protected. Date Folder Protect all photos in the Date Folder. All Lock all photos or videos.
DPOF (Digital Print Order Format) Trim The DPOF feature allows you to compile and select a group of pictures that you would like to print and will save your selection on the memory card so that you can use the memory card to print without having to individually specify the photos you want to print. The Trim setting allows you to crop photos and save them as new pictures. 1. Select [Yes] to confirm trim. Select a section of the photo to be trimmed using the zoom button and arrow buttons to trim a photo.
General Settings Sound Settings With this setting you may adjust the sound volume. Mode: 1. Press the button and press the [ ]/[ ] buttons to select . Press the button to enter the menu. 2. Press the [ ]/[ and press the /[ the menu. ] buttons to select ] button to enter Sound Settings Volume Back Sound Settings Power Saver Language World Time Date & Time Auto English Home 2022.03.01 15:14 3. Press the [ ]/[ ] buttons to select the item to be set and press the /[ ] button to enter the menu. 4.
Language Date & Time Refer to the “Resetting your Language” section on page 17. Refer to the “Resetting Date/Time” section on page 18. World Time LCD Brightness The Zone setting is a useful function for your overseas trips. This feature enables you to display the local time on the LCD while you are abroad. Use this setting to adjust the brightness of your LCD. 1. Press the [ ]/[ the departure place ( fields. ] buttons to select ) and destination( ) 2.
Connection Settings Mode: 1. Press the button and press the [ enter the menu. 2. Press the [ ]/[ 3. Select [USB] and press the USB 4. Press the [ 62 ] buttons to select /[ PC TV System ]/[ ] buttons to select and press the /[ button to ] button to enter the menu. ] button to enter the menu. USB NTSC ]/[ . Press the ] buttons to select an option, and press the PC Printer button to confirm.
Connecting to a Computer You can use a USB cable to connect the camera and copy (transmit) photos to a computer (PC or Mac), printer or other device. Setting the USB Mode Press the [ ]/[ ] buttons to select [PC] and press the button to confirm. Transferring Files to Your Computer The computer will automatically detect the camera as a removable drive.
Connecting to a Printer Setting the USB Mode ]/[ Press the [ USB ] buttons to select [Printer] and press the button to confirm. PC Printer After the camera is reset, it will switch to PC mode automatically from USB Mode. Connecting to your Printer 1. Make sure both the camera and printer are turned on. 2. Connect one end of the supplied USB cable to the USB port on your camera. 3. Connect the other end of the cable to the USB port on the printer.
If the camera is failed to connect to a printer, the following error message will appear on the LCD screen. Connection Failed! The error message above will also appear if the USB Mode is set incorrectly, in which case you should disconnect the USB cable, check the USB Mode settings, ensure that the printer is turned on, and then try connecting the USB cable again.
File Settings Mode: 1. Press the button and press the [ enter the menu. 2. Press the [ ]/[ ]/[ ] buttons to select ] buttons to select and press the /[ . Press the button to ] button to enter the menu. Format Copy to Card File Numbering Reset FW Version 66 V010320 3. Press the [ enter the menu. ]/[ ] buttons to select the item to be set and press the 4. Press the [ ]/[ ] button to select an option and press the /[ ] button to button to confirm.
Format Please Note: formatting enables you to delete all contents on the memory card and camera’s built-in memory, including protected photo and movie files. Format Doing so will clear all data. No Yes If there is no memory card in the camera, the built-in memory will be formatted; if there is a memory card, only the memory card will be formatted. Copy to Card Use this setting to copy the files stored in the camera’s built-in memory to a memory card.
File Numbering Firmware (FW) Version After you take a picture or video clip, the camera will automatically save it with a sequential number. You can use this to reset the file numbering to 1. Use this setting to view the current camera firmware version. FW Version File Numbering Current Ver: V1.00 Create a new directory and reset the file number. No Yes Back When there is a new firmware version in the SD card, select [Yes] to update.
APPENDICES Specifications Design and specifications are subject to change without notice. Image Sensor Lens Type 1/2.3"BSI CMOS Effective Pixels 16.35 Megapixels Total Pixels 16.76 Megapixels Focal Length 4.9mm (Wide) — 19.6mm (Tele) 35mm Film Equivalent 27mm (Wide) — 108mm (Tele) F Number F3.0 (Wide) — F6.
Number of Recording Pixels Still Image (4:3) (3:2) (16:9) 16MP: 4608 × 3456 14MP: 4608 × 3072 12MP: 4608 × 2592 10MP: 3648 × 2736 2MP: 1920 × 1080 5MP: 2592 × 1944 3MP: 2048 × 1536 0.3MP: 640 × 480 Movie Image Compression 1920 × 1080 (30fps), 1280 × 720 (60fps), 1280 × 720 (30fps), 640 x 480 (30fps), High-Speed Movie: 640 x 480 (120fps) Best, Fine, Normal DCF, DPOF (Ver1.1) Support Yes File Format 70 Still Image Exif 2.
Pan-Panorama Max 180°(Horizontal) LCD Display 2.
Flash Method Internal Flash Modes Force Off, Flash Auto, Force Flash, Slow Sync., Slow Sync.+Red-Eye Reduction, Red-Eye Reduction Shooting Range (Wide) Approx. 0.3m ~ 5.2m (ISO800) (Tele) Approx. 1.0m ~ 2.4m (ISO800) Recycling Time 6 seconds or less Flash Recording Media 72 Internal Memory: Approx. 63MB SD/SDHC/SDXC Card (Up to 512GB Support) [MMC Card not supported] Multi-Language Support 27 Languages Jacks USB 2.
Prompts and Warning Messages Message Description Action Warning! Battery exhausted. The camera battery is depleted. It is a warning indicating that the camera is going to shut off. Replace the battery. The camera will shut down in 2 seconds. Lens obstruction, Re-start Camera. The lens is jammed or some foreign object is preventing the lens from functioning properly. Turn the camera off and restart it to reset the lens. Suggest using tripod.
Message 74 Description Action Improper alignment. Please try again. The offset is too big for panorama shooting. This message will disappear after 2 seconds. Warning! Do not turn off your camera during update! This message appears during the firmware update process. This message disappears after the camera update and restart. Remove USB cable!! Indicates that you can disconnect the USB cable. The message disappears after you disconnect the USB cable.
Message Description Action Card Error ! During power-on, the memory card cannot be recognized. Format the memory card. WARNING: Formatting the memory card will erase all data on the card. Copy the data from the memory card to another storage, such as a computer. Otherwise, all data will be erased after the format. This message will disappear after 2 seconds. Card is not formatted. When an error occurs in the memory card, the message "Not Formatted" will appear. Format the memory card.
Message 76 Description Action This image cannot be edited. The file format does not support editing or the edited file cannot be edited again. This message will disappear after 2 seconds. Exceeded maximum folder number. This indicates that the memory card exceeded the maximum number of folders (999). This could cause a long read time during the camera's power up. Copy the data to your PC and format the memory card using the camera. Too many pictures for fast processing.
Troubleshooting Problem Possible causes Solution The battery has been depleted. The battery is not inserted correctly. Replace the new batteries. Camera turns off suddenly during operation The battery has been depleted. Replace the new batteries. The picture is blurred Camera movement while taking a picture. Turn on Anti-shake mode. The memory card is full. Use another memory card or delete unnecessary files.
Problem 78 Possible causes Solution Saving data to memory card is slow Using a memory card below Class 10 may result in slower recording times. Use a memory card with Class 10 or higher standard to improve performance. Cannot write to the memory card The memory card has been locked. Release the write lock of the memory card or replace with another card. Too many movies to process The number of pictures or folders in the memory card exceed the specifications, so the playback can not be displayed.
Memory Card Compatibility • Cards compatible with this camera (√ : Compatible X: Not Compatible) micro SD micro SDHC micro SDXC Conversion adapter to SD card SD SDHC SDXC Format FAT12, 16 FAT32 exFAT - FAT12, 16 FAT32 exFAT Capacity Up to 2GB 4~32GB 64GB~2TB - Up to 2GB 4~32GB 64GB~2TB Compatibility X X X √ √ √ √ It indicates that the writing speed class will be displayed on the memory card.
© 2022 JK Imaging Ltd. All Rights Reserved. The Kodak trademark, logo and trade dress are used under license from Eastman Kodak Company. All other logos, products or company names that are referred to in this document are trade names, trademarks or registered trademarks of their holders. The holders are not affiliated with JK Imaging Ltd., our products or our website. JK Imaging Ltd., 17239 So. Main Street, Gardena, CA 90248 USA kodakpixpro.com Made in Myanmar (Burma) Document No/Sequence: U.DIS.0063.0522.
