User manual

10
Other Safety Notes
Do not disconnect the power or turn the
camera o during the updating process. Doing
so may cause incorrect data to be written and
the camera may not power on later.
When using your camera on an airplane,
observe the relevant rules speciied by the
airline and FAA regulations.
Due to the limitations of manufacturing
technology, the LCD may have a few dead or
bright pixels. These pixels do no eect the
quality or performance of the camera, photos
or video.
If the LCD screen is damaged, pay particular
attention to the liquid crystal in the screen. If
any of the following situations arise, take the
recommended immediate action indicated
below:
1. If liquid crystal comes in contact with your
skin, please wipe with a dry cloth, wash
thoroughly with soap, and rinse with plenty
of clean water.
2. If liquid crystal gets into your eye, lush the
eye immediately with plenty of clean water
for at least 15 minutes and then seek for
medical assistance.
3. If liquid crystal is swallowed, immediately
lush your mouth thoroughly with clean
water and induce vomiting. Seek for medical
assistance.
WARNING
Altering, tampering or modifying the any parts
of WPZ2 camera are unauthorized and will void
the manufacturer’s warranty and “could” void
Federal and/or State Compliance.