Kodak EasyShare printer dock plus User’s Guide www.kodak.com For interactive tutorials, www.kodak.
Eastman Kodak Company 343 State Street Rochester, New York 14650 © Eastman Kodak Company, 2004 All screen images are simulated. Kodak, EasyShare, and XtraLife are trademarks of Eastman Kodak Company.
Product features Front/top/side view 1 2 3 4 5 6 20 7 19 18 8 17 16 15 14 13 12 11 10 9 1 Paper light 12 Cancel button 2 Battery charging lights/ Refresh button 13 Picture Size button 3 Color Cartridge light 14 Picture Size lights 4 Transfer button/light 15 Accessory door 5 Slide Show button/light 16 SD/MMC card slot light 6 Auto-Enhance button/light 17 SD/MMC card slot 7 IR sensor (for optional remote 18 USB device connector light or infrared device) 8 Paper tray 9 Paper tra
Product features Back/top/side view 1 2 3 4 9 8 7 6 5 1 Universal camera insert (installed as shown) 6 Cooling vents 2 Locator pin for camera 7 Slot for paper path 3 Camera connector 8 Color cartridge (installed as shown) 4 Power connector (DC-in) 9 Cartridge door 5 USB connector (to computer) ii www.kodak.
Table of contents 1 1 Getting started ........................................................................... 1 Package contents.............................................................................. 1 Finding a location for your printer dock plus ...................................... 2 Installing the custom camera insert.................................................... 2 Connecting the power.......................................................................
5 Installing software .................................................................... 22 Minimum system requirements ........................................................ 22 Installing the software..................................................................... 22 6 Using the printer dock plus with a computer ........................... 25 Connecting to a computer ............................................................... 25 Transferring pictures from your Kodak EasyShare digital camera..
1 Getting started Package contents 6 7 1 5 4 3 2 1 Printer dock 2 Paper tray 5 AC power adapter 6 AC power cord 3 Kodak color cartridge & photo paper kit / PH-10 (10-pack) 7 Universal camera insert (pre-installed) 4 Kodak EasyShare Ni-MH rechargeable battery pack* Not shown: Welcome Kit, consisting of User’s Guide (may be provided on CD), Start Here! guide, Kodak EasyShare software CD. Contents may change without notice. *Your camera may use a different battery type (see page 7).
Getting started Finding a location for your printer dock plus ■ Place the printer dock on a flat, clean, dust-free surface, in a dry location, and out of direct sunlight. 5 in. (12.7 cm) ■ Allow at least 5 in. (12.7 cm) clearance from the back of the printer dock for paper travel. ■ For proper ventilation, make sure the top and back of the printer dock are not blocked. ■ When connecting power or USB cables, keep the cables clear of the paper path to the front and rear of the printer dock.
Getting started 2 Install the custom camera insert included with your camera: a Place the rear tabs of the insert in the slots toward the back of the printer dock. b Press the front of the insert down and snap into place. Connecting the power RISK OF ELECTRIC SHOCK: Use only the AC power adapter included with your printer dock. Other adapters or cords can damage your camera, printer dock, or computer. 1 Remove the camera from the printer dock.
Getting started Handling and storing the color cartridge ■ For best quality prints, store the color cartridge in a location where the temperature does not exceed 85 °F (30 °C). ■ To avoid getting fingerprints on the ribbon, handle the color cartridge by the spool ends. ■ Keep the color cartridge away from direct sunlight and out of high-temperature environments (such as a vehicle parked in the sun).
Getting started ■ When the cartridge is almost empty, the Color cartridge light blinks slowly for 60 seconds. ■ When the cartridge is depleted, the Color cartridge light glows steady amber. IMPORTANT: The color cartridge may lock in place if there is a paper error. Do not attempt to remove the color cartridge without first clearing the paper error. Make sure the Paper light is off before attempting to remove the color cartridge.
Getting started Loading the paper IMPORTANT: Use only Kodak color cartridge & paper kits for your printer dock. Do not use inkjet paper. 1 Remove the paper tray from the printer dock if installed (see page 6). 2 Slide the paper tray cover back until it "clicks" into place, about 1.25 in. (3 cm), then lift up on the end of the paper tray cover. IMPORTANT: Do not load more than 25 sheets of paper. Use the upper limit line inside the paper tray as a guide to prevent overloading.
2 Setting up your EasyShare digital camera The Kodak EasyShare printer dock plus is compatible with Kodak EasyShare CX/DX6000/7000 series and LS600/700 series digital cameras (sold separately). Choosing the right camera battery CAUTION: Your printer dock is intended to charge only the Kodak EasyShare Ni-MH rechargeable battery pack (included) and the Kodak EasyShare Li-Ion rechargeable battery (included with some cameras). Other manufacturers’ batteries are not supported.
Setting up your EasyShare digital camera Important battery information Battery safety and handling ■ Do not allow batteries to touch metal objects, including coins. Otherwise, batteries may short circuit, discharge energy, become hot, or leak. ■ Dispose of batteries according to local and national regulations.
Setting up your EasyShare digital camera Docking and charging your EasyShare digital camera Docking your Kodak EasyShare digital camera lets you review and print pictures directly from the camera, transfer pictures from the camera to the computer, and charge the camera battery. 1 Make sure a dock insert is installed on the printer dock (see page 2), and a dock-rechargeable battery is installed in the camera (see page 7). 2 On the camera bottom, find the dock connector and locator hole.
Setting up your EasyShare digital camera Refreshing the Ni-MH rechargeable battery pack If you are getting fewer than 20 pictures per charge with your Ni-MH rechargeable battery pack, follow the tips under Extending battery life, page 8. If these don’t help, the battery pack needs to be refreshed. The refresh cycle completely discharges the battery pack, then fully recharges it. NOTE: A full refresh cycle can take up to 8 hours, depending on how much charge is left in your battery pack.
Setting up your EasyShare digital camera Setting the picture quality Before taking pictures, change the Picture Quality setting on your Kodak EasyShare digital camera to Best (3:2) . This helps ensure that the pictures you take are proportional to the printer dock paper, preventing unwanted cropping of your pictures. See your camera user’s guide for more information. Tagging pictures for automatic printing On your Kodak EasyShare digital camera: 1 Press the Share button. 2 Press to locate a picture.
3 Printing without a computer IMPORTANT: Wait until printing is complete before removing paper or the paper tray. Failure to do so can cause paper misfeeds or jams. Printing from your EasyShare digital camera 1 Take a picture with your camera (see your camera user’s guide). 2 Place the camera on the printer dock (see page 9). The current or most recent picture appears on the camera screen. ■ To print the current picture, press the Print button, .
Printing without a computer Printing from the internal SD/MMC card reader Use the built-in card slot to print pictures directly from your SD/MMC card. NOTE: To help you select pictures to print, dock your EasyShare camera (see page 9) before inserting the card into the SD/MMC card slot. 1 Open the accessory door on the printer dock. IMPORTANT: Insert card only as shown. Do not force the card into the card slot, and do not insert or remove a card when the printer dock is transferring pictures (see page 27).
Printing without a computer Printing from a Kodak card reader The Kodak EasyShare printer dock plus is compatible with the Kodak 8-in-1 card reader and the Kodak 6-in-1 card reader (each sold separately). Other Kodak USB card readers may work with the printer dock plus; however, other manufacturers’ card readers are not supported. NOTE: To help you select pictures to print, dock your EasyShare camera (see page 9) before connecting the card reader. 1 Open the accessory door on the printer dock.
Printing without a computer Printing tagged pictures If your camera or memory card contains pictures tagged for printing (see page 11 or your camera user’s guide), the printer dock gives you the option to print the tagged pictures first. If your EasyShare camera is docked, a message appears on the camera screen indicating that tagged pictures have been found. ■ ■ To print tagged pictures—press . The Print light blinks, printing starts, and tagged pictures are printed.
Printing without a computer Wireless printing Printing with the optional remote control The Kodak remote control (sold separately) lets you view and print pictures remotely. The remote control is especially helpful when using your television as a display (see page 20). See the remote control user’s guide for details. Printing from an infrared device You can print from devices that use IrDA® wireless technology, including many PDAs and wireless mobile telephones.
Printing without a computer Changing the printed picture size 1 Refer to the appropriate section in this chapter to set up printing options on the device you wish to print from. 2 Before printing, while making selections or changing settings, press the Picture Size button repeatedly to scroll through and select a picture size: 1 up—one 4 x 6 in. (102 x 152 mm) picture per sheet (default) 2 up—up to two 2.1 x 3.3 in. (54 x 85 mm) pictures per sheet 4 up—up to four 2 x 3 in.
Printing without a computer Effect of picture size on number of copies When setting up a print job (see page 12), if you do not specify the number of copies to print, the printer dock maximizes the use of white space on the paper by filling it with multiple copies of the current (or most recent) picture. For example, if you set the picture size to 4 up, then do nothing more than press the Print button, , four 2 x 3 in. (51 x 76 mm) pictures are printed on one sheet of paper.
Printing without a computer Removing the perforated tabs from the paper IMPORTANT: Remove perforated tabs only after printing. Paper missing perforated tabs will not feed properly. 1 Fold the tabs up, then down. 2 Remove each tab and discard. www.kodak.
4 Reviewing pictures To review pictures stored on your Kodak EasyShare CX/DX6000/7000 or LS600/700 series digital camera: 1 Place the Kodak EasyShare digital camera in the printer dock (see page 9). 2 Press on the printer dock to scroll through the pictures, or press the Slide Show button, (see page 21). Displaying pictures on a television With a docked camera, you can view pictures on a television, monitor, or any device equipped with a video input.
Reviewing pictures Running a slide show The Slide Show feature lets you automatically review pictures and videos stored on your EasyShare digital camera. 1 Place the Kodak EasyShare digital camera in the printer dock. ■ To view the slide show on a television, connect the printer dock to a TV (see page 20) before docking your camera. 2 Press the Slide Show button, . The pictures and videos are displayed in the order in which you took them. The slide show is finished when "The End" appears on the screen.
5 Installing software Minimum system requirements Windows OS-based computers Macintosh computers ■ Windows 98, 98SE, ME, 2000 SP1, ■ Power Mac G3, G4, G5, G4 Cube, iMac; ■ ■ Mac OS X version 10.2.3 or XP OS Internet Explorer 5.01 or higher 233 MHz processor or greater 64 MB RAM (128 MB RAM for Windows XP OS) 200 MB hard disk space available* CD-ROM drive Available USB port Color monitor, 800 x 600 pixels (16-bit or 24-bit recommended) ■ ■ ■ ■ ■ ■ PowerBook G3, G4; or iBook computers ■ Safari 1.
Installing software 4 Follow the on-screen instructions to install the software. Select Complete to automatically install the most commonly used applications. Select Custom to choose the applications you wish to install. IMPORTANT: To use the printer dock plus with a computer, you must install the printer driver. If you choose Custom installation, make sure the printer dock is selected. The printer driver is automatically installed if you choose Complete installation.
Installing software Uninstalling the software If you wish to remove the printer driver or EasyShare software from your computer, use the following procedure: Windows OS-based computer: 1 Open the Control Panel: From the Start menu, select Settings, then select Control Panel. (On Windows XP operating systems, depending on your configuration, Control Panel may be found in the Start menu.) 2 Double-click Add/Remove Programs. 3 Select Kodak EasyShare software, then click Remove.
6 Using the printer dock plus with a computer Connecting to a computer A USB cable is required to connect the printer dock to a computer. Use the USB cable that came with your Kodak EasyShare digital camera. To purchase a cable separately, see a retailer of Kodak products, or visit www.kodak.com/go/accessories. IMPORTANT: Make sure your camera is NOT docked when you connect the printer dock to the computer. 1 Make sure Kodak EasyShare software is installed on the computer (see page 22).
Using the printer dock plus with a computer Transferring pictures from your Kodak EasyShare digital camera 1 Make sure Kodak EasyShare software is installed (see page 22) and the printer dock is connected to your computer (see page 25). 2 Place the camera on the printer dock (see page 9). 3 Press the Transfer button, , on the printer dock. Kodak EasyShare software opens on your computer (if it is installed). 4 Use Kodak EasyShare software to transfer pictures from the printer dock to your computer.
Using the printer dock plus with a computer Transferring pictures from the internal SD/MMC card reader 1 Make sure Kodak EasyShare software is installed (see page 22) and the printer dock is connected to your computer (see page 25). 2 Open the accessory door on the printer dock. 3 If a Kodak EasyShare camera is docked, remove it. IMPORTANT: Insert card only as shown. Do not force the card into the card slot.
Using the printer dock plus with a computer Transferring pictures from a Kodak card reader The Kodak EasyShare printer dock plus is compatible with the Kodak 8-in-1 card reader and the Kodak 6-in-1 card reader (each sold separately). Other Kodak USB card readers may work with the printer dock plus; however, other manufacturers’ card readers are not supported. 1 Make sure Kodak EasyShare software is installed (see page 22) and the printer dock is connected to your computer (see page 25).
Using the printer dock plus with a computer Transferring pictures from a PictBridge compatible device 1 Make sure Kodak EasyShare software is installed (see page 22) and the printer dock is connected to your computer (see page 25). 2 Open the accessory door on the printer dock. 3 If a Kodak EasyShare camera is docked, remove it. If there is a memory card in the SD/MMC card slot, remove it as well.
Using the printer dock plus with a computer Printing from a computer We recommend using Kodak EasyShare software (included) for printing. This software lets you take advantage of a wide range of features, including full color enhancement, red-eye reduction, picture organization, and much more. If there are no pictures on your computer, use the printer dock to transfer pictures from your camera or memory card before printing (see page 26).
Using the printer dock plus with a computer Printing using other applications 1 Make sure the printer driver is installed (see page 22) and the printer dock is connected to your computer (see page 25). 2 Open the pictures you wish to print in the application from which you want to print. 3 Access printer settings by selecting Print or Page Setup from the File menu (depending on your application and operating system).
Using the printer dock plus with a computer Windows 98/ME OS: 1 From the Start menu, select Settings, then select Printers. 2 Right-click the printer dock icon, then select Properties. 3 Click the Printer Options tab. 4 Under Color Control, select a color mode option. 5 Click OK when complete. Mac OS X: 1 Make sure the printer dock is selected as the current printer. 2 From an application File menu, select Print. 3 Click the drop-down menu, then select Color. 4 Select Kodak Color.
7 Care and maintenance General care CAUTION: Always disconnect the power before cleaning. Do not use harsh or abrasive cleaners or organic solvents on the printer dock or any of its parts. ■To clean, wipe the outside of the printer dock with a clean, dry cloth. ■ Support the printer dock and tray by placing it on a flat, level surface. Do not block the cooling vents. ■ Avoid blocking the back of the printer dock and paper tray exit. ■ Keep power and USB cables away from the paper path.
Care and maintenance Cleaning the paper feed roller To prevent misfeeds and to make sure your pictures look their best, we recommend that you keep the paper feed roller clean. Inspect the roller weekly for debris particles, and clean if necessary. IMPORTANT: Unplug the power before cleaning the paper feed roller. 1 Unplug the AC power cord from the power outlet. 2 Remove the paper tray from the printer dock, and leave the paper tray door open. 3 Lightly moisten a lint-free cloth with water.
8 Troubleshooting When you have questions about your printer dock, start here. Additional technical information is available in the ReadMe file located on the Kodak EasyShare software CD. For updates to Troubleshooting information, visit www.kodak.com/go/printerdocks. Printing problems If... Try the following Paper does not feed (Paper light may glow steady amber) IMPORTANT: Use only Kodak color cartridge & paper kits for your printer dock. Do not use inkjet paper. ■ The paper tray may be empty.
Troubleshooting If... Try the following Printer is jammed IMPORTANT: Use only Kodak color cartridge & paper kits for your printer dock. Do not use inkjet paper. (Paper and/or Color cartridge ■ If the Paper light is blinking quickly: lights may blink 1 Remove the paper tray (page 6). quickly) 2 Unplug the AC power cord, wait 5 seconds, then plug it back in. If the paper does not automatically eject, carefully remove the paper manually.
Troubleshooting If... Try the following IMPORTANT: Use only Kodak color cartridge & paper kits for Printing stops your printer dock. Do not use inkjet paper. during mid-print (paper stops ■ Check the paper: feeding, and Paper 1 Remove the paper tray (page 6). light may blink) 2 Check the paper slot on the back of the printer dock. 3 Remove loose paper from the printer dock. If paper is jammed, see page 36. 4 Inspect the paper supply: make sure removable tabs have not been detached from the paper.
Troubleshooting If... Try the following Print is too dark or ■ Use the Auto-Enhance button to automatically correct exposure problems (page 18). is discolored ■ Try re-taking the picture with the flash on, or move within the flash range of the camera. See your camera user’s guide for details. ■ Adjust the exposure compensation on your camera, and try re-taking the picture. See your camera user’s guide for details. ■ Edit the picture using Kodak EasyShare software on your computer.
Troubleshooting If... Try the following Nothing happens NOTE: The Kodak EasyShare printer dock plus is compatible with the Kodak 8-in-1 card reader and the Kodak 6-in-1 card reader (each when you try to print (from a sold separately). Other Kodak USB card readers may work with the Kodak card printer dock plus; however, other manufacturers’ card readers are reader) not supported. ■ Check the USB connections from the card reader to the printer dock (page 14).
Troubleshooting If... Try the following Printing is slow NOTE: When printing a large number of prints, printing may slow down to prevent the print head from overheating. ■ Make sure the printer dock is not placed in direct sunlight or is not operating in a high-temperature environment. ■ Make sure the cooling vents are not blocked or dirty (page 2). ■ Close unnecessary software applications. ■ Make sure your computer meets the minimum system requirements (page 22). Upgrade your system if necessary.
Troubleshooting Transfer/communication problems If... Try one or more of the following , on the printer dock. Nothing happens ■ Press the Transfer button, when you try to ■ Check the power and USB connections from the printer dock transfer pictures to to computer (page 25). the computer ■ The camera is not properly seated on connector. Reseat the camera on the printer dock (page 9).
Troubleshooting Printer dock plus status lights Color cartridge light Light status Cause Action/solution IMPORTANT: The color cartridge may lock in place if there is a paper error. Do not attempt to remove the color cartridge without first clearing the paper error. Make sure the Paper light is off before attempting to remove the color cartridge. Light is off The color cartridge is properly installed and is working normally. None required.
Troubleshooting Paper light Light status Cause Action/solution IMPORTANT: The color cartridge may lock in place if there is a paper error. Do not attempt to remove the color cartridge without first clearing the paper error. Make sure the Paper light is off before attempting to remove the color cartridge. Light is off The paper tray is properly installed None required. and has an ample supply of paper. Light blinks amber There is a paper jam. Clear the jam (page 36), then press .
Troubleshooting Battery charging lights Light status Cause Action/solution All lights are off The camera is not properly seated on connector. Reseat the camera on the printer dock (page 9). An unrecognized battery type Install a Kodak EasyShare is installed, or no battery is Ni-MH rechargeable battery installed. pack or Kodak EasyShare Li-Ion rechargeable battery (page 7). One steady green light The camera was just placed None; the dock is checking on the dock. the charge status of the battery.
Troubleshooting Print button/light Light status Cause Action/solution Light glows steady green The printer dock is ready for printing. None required. Light blinks green The printer dock is printing. Light is off There are no pictures in the camera or on the card. None required. To enable Print: The camera is not docked or a 1 Take pictures. compatible Kodak card reader 2 Dock the camera, or is not connected. connect a compatible Kodak card reader (page 14).
Troubleshooting Transfer button/light Light status Cause Action/solution Light glows steady The printer dock is ready for None required. green transferring pictures. Light blinks green Pictures are being transferred to the computer. None required. After transferring pictures, the transfer light continues to blink green until either the Transfer button is pressed again or the connection has timed-out. Light is off There are no pictures in the None required.
Troubleshooting Picture Size lights Light status Cause Action/solution One light glows steady The indicated picture size is green available and selected. None required. To change picture size, press the Picture Size button repeatedly. All lights are off To enable the picture size option: 1 Take pictures. There are no pictures in the camera, on the card, or on the PictBridge compatible device.
Troubleshooting Slide Show button/light Light status Cause Action/solution Light glows steady The Slide Show feature is available. green None required. Press the Slide Show button to start. Light blinks green The Slide Show is running. None required. To cancel the Slide Show, press . Light is off The Slide Show feature is not available. None required. To NOTE: The Slide Show feature is only available if a run a Slide Show, see page 21. camera is docked.
Troubleshooting SD/MMC card slot light Light status Cause Action/solution Light blinks green Slow blink: the SD/MMC None required. card reader is initializing or communicating with the printer dock. Fast blink: there is a card Remove the card and make sure the or communication error. card is not write protected or damaged. Replace with a new card if necessary. Reinsert the card. Light is off The SD/MMC card is not None required. inserted or is improperly inserted in SD/MMC card slot.
9 Getting help Helpful links Printer dock Get information and support for your product www.kodak.com/go/printerdocks Download the latest printer dock software, firmware, and drivers www.kodak.com/go/printerdockdownloads Software Get information on Kodak EasyShare software www.kodak.com/go/easysharesw (or click the Help button in EasyShare software) Get help with the Windows operating www.kodak.com/go/pcbasics system and working with digital pictures Other Register your printer dock www.kodak.
Getting help Telephone customer support If you have questions concerning the operation of the printer dock, software, or camera, you may speak with a customer support representative. Before you call Have the printer dock or camera connected to your computer.
10 Appendix Printer dock plus specifications For more specifications, visit www.kodak.com/go/printerdocks. Printer dock specifications Printing process Thermal dye transfer Operating environment (for Temperature: 50 to 95 °F (10 to 35 °C) optimum picture quality) Humidity: 10% to 86% RH Power Output: 24 V DC Input: 100 V to 240V AC @ 50/60 Hz, connection via AC power adapter Consumption while printing: 60 watts maximum Print speed ≤ 60 sec.
Appendix Additional safety and maintenance tips ■ Always follow basic safety precautions. Refer to the “Important Safety Instructions” sheet packed with your printer dock. ■ Do not allow chemicals, such as suntan lotion, to come into contact with the painted surface of the printer dock. ■ If the printer dock has been subjected to inclement weather or you suspect water has gotten inside the printer dock, turn off the printer dock and remove the paper tray and color cartridge.
Appendix Regulatory information FCC compliance and advisory Kodak EasyShare printer dock plus This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Appendix VCCI Class B ITE English translation: This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Install and use the equipment according to the instruction manual. www.kodak.
Index Numerics 4-way control, i, 12, 13, 14, 20 A AC power adapter & cord, 1 connecting, 3 accessories & supplies, ordering, 50 accessory door, i, 13, 14, 15, 20, 27, 28, 29 audio/video (A/V) out connector, i, 20 auto-enhance button/light, i, 18, 47 improving picture quality with, 18 B battery charging, 9, 10 charging lights, i, 9, 10, 44 extending life, 8, 10 loading, 7 refreshing Ni-MH battery pack, 10 safety and handling, 8 types, 7 button 4-way control, i, 12, 13, 14, 20 auto-enhance, i, 18 cancel, i, 1
Index color cartridge door, ii, 4 handling, storing, 4 installing, removing, 4 light, i, 42 color, automatic correction, 31 computer connecting to, 25 installing software, 22 printing from, 30 system requirements, 22 transferring pictures to, 26, 27, 28, 29 uninstalling software, 24 connecting Kodak card reader, 14, 28 PictBridge compatible device, 15, 29 power, 3 to computer, 25 to television, 20 connector A/V out, i, 20 camera, ii power (DC-in), ii, 3 USB (from device), i, 14, 15, 28, 29 USB (to computer
Index K Kodak card reader printing from, 14 transferring pictures from, 28 Kodak EasyShare software help, 50 installing, 22 printing with, 30 uninstalling, 24 Kodak web sites, 50 L layout.
Index size selection.
Index service and support, 51 setup camera, 7 printer dock, 1 slide show, 21 software, 22 size, picture.
