KODAK EKTAPRO 7010/7020/9010/9020 Slide Projector SUPPLEMENT TO THE MANUAL ©Eastman Kodak Company, 2000
Function Codes This label is designed to be fixed on the rear of your IR Remote System (transmitter). Function Code • Dissolve times (0.1 - 9.
Presentations with KODAK EKTAPRO 7010, 7020, 9010 and 9020 Slide Projectors One of the important new features of the KODAK EKTAPRO 7010, 7020, 9010 and 9020 Slide Projectors is the integrated dissolver for a 2-projector dissolve. You just have to link two projectors using the KODAK Dissolve Cable (accessory) and you can immediately run more interesting and lively live presentations using the infrared remote control. It is also possible to play automatic slide shows with a fixed dissolve time.
COMMANDS AND EFFECTS Overview The following table gives and overview of all commands and effects.
*Random Access Further control facilities You select slides in 2 projector dissolve according to the slide number of your presentation and not according to the slide tray number (see the table on page 34)! Of course, if the slide you are looking for is in the slide tray of the projector which is currently projecting a slide, a dissolve is not possible. The slide will first be faded down and the new slide faded up. In this case, the screen will stay blank during the transport period.
Transport control on the MASTER: The slide transport runs, as usual, via the two transport buttons. Transport control on the SLAVE: The slide transport is via the two focus buttons. It is therefore not possible to focus the two projectors with this setting! Access to individual slides (RA control) is still possible (see *Random Access). PARELLEL PROJECTION (970) You can also program parallel projections via your remote control. Press <970> and <*>.
Slide Sorter Aid Slide No. Position Position in in SLAVE MASTER tray tray Slide No.