User Guide
17
6. To make edits to the image in terms of brightness or coloration,
press the OK button while in Capture Mode. The screen will
give you the option to adjust brightness and RGB values. Use
the arrow keys to navigate and OK to conirm.
a. To adjust the levels of Red/Green/Blue tones in your image,
use the arrows once you’ve brought up the RGB screen to
select an option and then increase or decrease the values.
c. In the bottom corner you can select “RESET”, if you over-
adjust the image and can’t get it back to normal, select the
RESET option and press the OK button to reset the image
back to the way it was prior to adjusting.
b. The option all the way at the top is the Brightness
adjustment. Use the arrows to increase or decrease the
exposure value from -2.0 to +2.0 in increments of 0.5 EV.