KODAK Large Inflatable Screen For Projecting Movies, Games, and More User Manual 112"H | 145"W | 64"D (284.48 cm | 368.3 cm | 162.56 cm) Please read all directions before using the product and retain this guide for reference.
CONTENTS 2 1 INTRODUCTION 3 2 PARTS 3 3 SAFETY PRECAUTIONS 4 4 SETUP 5 DEFLATION AND STORAGE 5 6 CARE AND MAINTENANCE 5-6 4-5 A. SCREEN MAINTENANCE 5 B. USING THE REPAIR PATCHES 6 C.
1. INTRODUCTION Thank you for purchasing the KODAK Large Inflatable Screen. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty. Please read all directions before using the product and retain this guide for reference. This product is intended for household use only.
3. SAFETY PRECAUTIONS • • • • • • • • • • • • • • • • • • • • • • • This product should only be installed by an adult. Keep all electrical parts away from children. Keep all electrical lines, radios, speakers and other electrical devices away from the inflatable screen and the air pump or risk serious electric shock. Do not place the screen near or under overhead electrical lines or risk serious electric shock. Do not immerse the screen or air pump in water.
4. Attach the fabric tube to the air pump, ensuring the tube is not twisted. 5. Wrap the drawstring around the tube and the end of the air pump, then tie it securely in place. 6. Plug in the air pump, then turn on the power. 7. Once the screen has inflated, connect each of the four (4) included ropes to either side. 8. Secure the screen in place by driving the included stakes through each of the loops, located at the base of the screen. 9. Secure the air pump to the ground using the included stakes. 5.
B. USING THE REPAIR PATCHES 1. Deflate the screen. Then clean the damaged area, allowing it to dry thoroughly. 2. Cut out a portion of the patch to the desired size, rounding the corners as illustrated. 3. Remove the adhesive backing from the patch, then position the patch over the damaged area. 4. Smooth out any bubbles so that the patch lays flat. 5. Allow the patch to sit for at least 30 minutes before inflating the screen. 6C.
8. WARRANTY LIMITED WARRANTY ON KODAK LARGE INFLATABLE SCREEN THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. WE WARRANT THAT DURING THE WARRANTY PERIOD, THE PRODUCT WILL BE FREE FROM DEFECTS IN MATERIALS AND WORKMANSHIP. LIMITATION OF LIABILITY TO THE EXTENT NOT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, ORAL, WRITTEN, STATUTORY, EXPRESS OR IMPLIED.
KODAKPHOTOPLUS.COM The Kodak trademark, logo and trade dress are used under license from Eastman Kodak Company. All other products, brand names, company names and logos are trademarks of their respective owners, used merely to identify their respective products, and are not meant to connote any sponsorship, endorsement or approval. Distributed by C&A Marketing, Inc., 114 Tived Lane East, Edison, NJ 08837 USA, C&A Marketing UK LTD, 167 Hermitage Road, Crusader Industrial Estate, London N4 1LZ, UK ©2019.
