User Manual

4
This product should only be installed by an adult. Keep all electrical parts away from children.
Keep all electrical lines, radios, speakers and other electrical devices away from the inlatable screen
and the air pump or risk serious electric shock.
Do not place the screen near or under overhead electrical lines or risk serious electric shock.
Do not immerse the screen or air pump in water.
The air pump is a high volume device, and is capable of moving a lot of air very quickly. When using
the air pump, keep in mind the following:
- Place the air pump in an area where it will not suck in dirt or leaves.
- Keep away from water.
- Keep away from high-traic areas.
- Keep away from children.
Only use the provided air pump for inlation
The air pump is not a toy. It should only be used under the direct supervision of a competent adult.
This product is intended for domestic and outdoor use only.
When in use, adult supervision is required.
Keep all parts away from open lames and other heat sources.
Do not attach or leave any items on/inside the product.
Do not jump o of or onto the product.
Do not use this product in public areas or as a rental.
Do not use in windy conditions.
Do not leave the product out in the rain.
Do not open or try to service the air pump. If the air pump needs servicing, take it to a
qualiied professional.
Clearly mark the path of the power cord to avoid tripping and/or damage by yard equipment such
as lawn mowers, etc.
Do not leave air pump unattended.
Do not cover the air intakes when the air pump is being used and do not insert small objects into
any part of the air pump.
We do not recommend using extension cords with this product.
Disconnect the air pump from the power source when moving the screen.
To reduce the risk of ire or electric shock, do not use the air pump with any solid-state speed
control device.
Securely stake the air pump and screen into the ground before use.
1. Remove the screen and all other parts from the box, making sure the parts in the box match those
listed in the Parts section of this manual.
2. Connect the white screen to the inlatable frame by connecting the attached buckles.
3. Unroll and unfold the screen body in the center of the area where you would like to use it.
3. SAFETY PRECAUTIONS
4. SETUP