User Manual
5
4. Attach the fabric tube to the air pump, ensuring the tube is not twisted.
5. Wrap the drawstring around the tube and the end of the air pump, then tie it securely in place.
6. Plug in the air pump, then turn on the power.
7. Once the screen has inlated, connect each of the four (4) included ropes to either side.
8. Secure the screen in place by driving the included stakes through each of the loops, located at the
base of the screen.
9. Secure the air pump to the ground using the included stakes.
1. Turn o the air pump and unplug it from the outlet
2. Remove all stakes in the screen and air pump.
3. Untie the drawstring from the intake tube and allow the screen to fully delate.
4. Remove the white screen by undoing the attached buckles.
5. Slowly roll the screen, pushing the air out as you do so.
6. Store inside the included carrying case.
Carefully read and follow these instructions to maintain the integrity of your screen and ensure it
remains in good condition.
• As an outdoor product, the screen may be subject to wear and tear. Always inspect for signs of
fabric damage. Weak or torn surfaces should be repaired immediately.
• To clean, wipe the screen with a dry cloth, or a cloth dampened with a neutral, sanitizing solution.
• Never store the screen while it is wet. Allow it to dry before rolling it up, or risk the growth of mildew
or other bacteria.
5. DEFLATION AND STORAGE
6. CARE AND MAINTENANCE
6A. SCREEN MAINTENANCE