User Manual

13
23. SETTING DATE AND TIME
24. RESETTING THE PROJECTOR
Your projector should automatically update to the correct date and time once you connect to a
wireless network. If you need to manually adjust the date and time, follow these instructions:
1. From the home screen, select Settings.
2. Scroll down to select Date and Time.
3. Either enable automatic date and time, or adjust the date and time manually.
If something goes wrong, you may need to perform a factory reset on your projector. Please note,
this will reset all your settings and delete your saved data, such as app login information. Follow these
instructions to reset your projector:
1. From the home screen, select Settings.
2. Scroll down to Factory Reset.
3. If you want to back up your data, select the irst option, and connect an associated account.
To adjust keystone manually:
1. Select the Advanced option.
2. Adjust the four sides correction.
3. Back out of the page to save your changed settings.
4. When you’ve inished backing up your data (or not), select the bottom option, “Factory
Data Reset”.