User Manual
Table Of Contents
- Before You Start
- Safety Notes
- Contents
- Getting Ready
- Operation Method
- Turn On / Off
- Set your Language, Date and Time after the first power-on
- LCD Screen Display
- Introduction to Basic Operation of Recording and Shooting
- LCD Screen Display under Playback Status
- Introduction to Basic Operation of Playback
- Introduction to the Setting Mode of Menu Options
- Menu Introduction
- Introduction to General Settings
- Introduction to Mode Settings
- Movie Settings Introduction
- Still Settings Introduction
- AP Settings Introduction
- Connecting the Camera with the Smart Device
- Smart Device APP Operating Method
- Connection Port Introduction
- Appendices
- Special Accessories
99
2. Open the bottom part of the xing sleeve and set it in the Action Cam. Insert the connector
into the bottom part of the xing sleeve, and then tighten them with screw.
3. Assemble the base, pre-tightening handle and bar clamp according to the direction
illustrated in the picture. First press the base into the bar clamp, and then rotate and tighten
the pre-tightening handle.
Fixing sleeve
Screw
Connector
Pre-tightening Handle