User Manual
Table Of Contents
- Before You Start
- Safety Notes
- Contents
- Getting Ready
- Operation Method
- Turn On / Off
- Set your Language, Date and Time after the first power-on
- LCD Screen Display
- Introduction to Basic Operation of Recording and Shooting
- LCD Screen Display under Playback Status
- Introduction to Basic Operation of Playback
- Introduction to the Setting Mode of Menu Options
- Menu Introduction
- Introduction to General Settings
- Introduction to Mode Settings
- Movie Settings Introduction
- Still Settings Introduction
- AP Settings Introduction
- Connecting the Camera with the Smart Device
- Smart Device APP Operating Method
- Connection Port Introduction
- Appendices
- Special Accessories
103
2. Thread both ends of the band into the buckle, and then press the buckle clamp.
3. Align the location pole of the base to the location hole of the action cam, and align the
screw on the base to the tripod socket of the action cam. Rotate the screw for xing.
4. Assemble the base, pre-tightening handle and vented helmet strap mount according to the
direction illustrated in the picture. First press the base into the vented helmet strap mount,
and then rotate and tighten the pre-tightening handle.
Buckle
Buckle Clamp
Pre-tightening Handle
Buckle Adhesive Mount
Base