User Manual
Table Of Contents
- Before You Start
- Safety Notes
- Contents
- Getting Ready
- Operation Method
- Turn On / Off
- Set your Language, Date and Time after the first power-on
- LCD Screen Display
- Introduction to Basic Operation of Recording and Shooting
- LCD Screen Display under Playback Status
- Introduction to Basic Operation of Playback
- Introduction to the Setting Mode of Menu Options
- Menu Introduction
- Introduction to General Settings
- Introduction to Mode Settings
- Movie Settings Introduction
- Still Settings Introduction
- AP Settings Introduction
- Connecting the Camera with the Smart Device
- Smart Device APP Operating Method
- Connection Port Introduction
- Appendices
- Special Accessories
19
Please select appropriate lens cover
when taking videos and pictures,
otherwise it will affect the image effect.
When the product is exposed
to uctuations in temperature,
condensation may form on the inside
surface of the lens cover. If this
happens, remove the lens cover, clean
it with a soft, dry, lint-free cloth, and
then reinstall the lens.
Steps for installing the lens cover:
1. Hold the product with your left hand, and
pull the lens buckle with your nger to the
left end as illustrated in the photo, hold
the lens cover ring with your right hand.
2. When three alignment points are in a
straight line, buckle the lens cover to the
lens, and rotate against the OPEN arrow
direction.
3. When the notch of the lens cover ring
is aligned with the lens buckle, loose
your left hand from the lens buckle, and
remove your right hand from the lens
cover.
①
②