User Manual
Table Of Contents
- Before You Start
- Safety Notes
- Contents
- Getting Ready
- Operation Method
- Turn On / Off
- Set your Language, Date and Time after the first power-on
- LCD Screen Display
- Introduction to Basic Operation of Recording and Shooting
- LCD Screen Display under Playback Status
- Introduction to Basic Operation of Playback
- Introduction to the Setting Mode of Menu Options
- Menu Introduction
- Introduction to General Settings
- Introduction to Mode Settings
- Movie Settings Introduction
- Still Settings Introduction
- AP Settings Introduction
- Connecting the Camera with the Smart Device
- Smart Device APP Operating Method
- Connection Port Introduction
- Appendices
- Special Accessories
47
Loop recording
Loop recording allows for the recording of
independent segments of movies according
to selected time length from the beginning of
recording. The product will continually record
movies of the length selected until the
record button is pressed to end recording.
When the memory card is full, the product
will overwrite the recorded les starting from
the rst movie circularly.
There are 3 options in 「Loop recording」:
•
Off
•
5 minutes
•
10 minutes
Loop recording method of operation:
1. After selecting Loop recording time,
press
to return to the viewnder
status. LCD will display corresponding
icons;
2. Press
to start recording;
3. Press
again to nish recording.
00:00:2300:00:23
Movie Size cannot be selected as
WVGA120 or WVGA60.
When Time Lapse or Motion detection
is enabled, the Loop recording feature
cannot be used.
Loop recording feature can only be
used when there is a memory card in
the product.
Turn off the product when the Loop
recording function is enabled and then
restart the product. You’ll nd the Loop
recording function is still enabled.