User Manual
Table Of Contents
- Before You Start
- Safety Notes
- Contents
- Getting Ready
- Operation Method
- Turn On / Off
- Set your Language, Date and Time after the first power-on
- LCD Screen Display
- Introduction to Basic Operation of Recording and Shooting
- LCD Screen Display under Playback Status
- Introduction to Basic Operation of Playback
- Introduction to the Setting Mode of Menu Options
- Menu Introduction
- Introduction to General Settings
- Introduction to Mode Settings
- Movie Settings Introduction
- Still Settings Introduction
- AP Settings Introduction
- Connecting the Camera with the Smart Device
- Smart Device APP Operating Method
- Connection Port Introduction
- Appendices
- Special Accessories
54
AP Settings Introduction
The action cam can be wirelessly connected
with your smart device.
Please review the following items before your
rst connection:
1. Your smart device system version needs
to be iOS 7 or higher and Android 4.2 or
higher. If not, please upgrade your smart
device system version.
2. Please do not use in places having high
intensity magnetic eld, electrostatic and
electric wave interference (for example
near a microwave oven), which may
cause failure in receiving signals.
3. Please maintain a distance between the
action cam and the smart device less
than 10 meters (32.8 feet) without signal
shielding interference.
4. Please do not use wireless connection
functionality on a plane.
5. The action cam and the smart device can
only be connected one to one.
6. When the smart device judges the
system to be out of memory, the App will
not be able to run normally. Please clean
up the memory of the smart device.
7. When the temperature of the battery is
higher than 68 °C :
① AP setting cannot be enabled;
② Wireless connection will be
automatically disconnected.