User Manual
Table Of Contents
- Before You Start
- Safety Notes
- Contents
- Getting Ready
- Operation Method
- Turn On / Off
- Set your Language, Date and Time after the first power-on
- LCD Screen Display
- Introduction to Basic Operation of Recording and Shooting
- LCD Screen Display under Playback Status
- Introduction to Basic Operation of Playback
- Introduction to the Setting Mode of Menu Options
- Menu Introduction
- Introduction to General Settings
- Introduction to Mode Settings
- Movie Settings Introduction
- Still Settings Introduction
- AP Settings Introduction
- Connecting the Camera with the Smart Device
- Smart Device APP Operating Method
- Connection Port Introduction
- Appendices
- Special Accessories
55
Step 2: setting up the smart device
1. Enable the wireless function of the smart
device to search surrounding wireless
devices;
2. Select the name of the action cam to be
connected (PIXPRO-SP1_XXXX), and
input the eight-digit digital password
displayed next to WPA2-PSK on the
action cam;
3. Download the special APP installation
package (APP name: PIXPRO SP1) from
the device appropriate APP store, and
install;
4. Click the icon of the APP
to enable
the APP.
Step 3: set up completion
1. Once the APP is connected to the
action cam, functional operations can
be enabled on the smart device. If there
is a need to interrupt the connection,
press , so that the selection interface
appears, select , press , interrupt
connection, and return to the SSID
interface;
Connection setting method of the
product and the smart device:
Step 1: setting up the product
1. Press
in the viewnder status, select
「AP Settings」, and press to enable
wireless connection function so that the
SSID interface in 「AP mode」 appears.
SSID and WPA2 password messages are
displayed in the interface.
AP mode
SSID:PIXPRO-SP1_1234
WPA2-PSK:12345678
Wireless connection process takes
about 30 seconds. At this moment,
except for , other buttons are
deactivated.