User Manual
Table Of Contents
- Before You Start
- Safety Notes
- Contents
- Getting Ready
- Operation Method
- Turn On / Off
- Set your Language, Date and Time after the first power-on
- LCD Screen Display
- Introduction to Basic Operation of Recording and Shooting
- LCD Screen Display under Playback Status
- Introduction to Basic Operation of Playback
- Introduction to the Setting Mode of Menu Options
- Menu Introduction
- Introduction to General Settings
- Introduction to Mode Settings
- Movie Settings Introduction
- Still Settings Introduction
- AP Settings Introduction
- Connecting the Camera with the Smart Device
- Smart Device APP Operating Method
- Connection Port Introduction
- Appendices
- Special Accessories
82
Connect a Computer
Connection Port Introduction
The product can be connected to the
computer using a USB cable to allow for
copying the les from the product into the
computer.
Steps:
1. Open the rear cover of the product,
connect one end of the USB cable to the
computer (the computer needs to be in
on state) and the other end to the USB
port of the product;
2. The product display will show a rolling
connection cartoon. The computer will
automatically sense the product.
3. Open the folder of the product on the
computer and copy the data you need to
the computer.
4. After transmission is completed, please
cancel the USB connection by safely
pulling out the USB device from the
computer system;
5. Pull out the USB cable. The product will
automatically shut down.
The product supports Windows operating
systems (Windows XP, Windows Vista ,
Windows 7, and Windows 8) and the Mac
operating system.