User Manual
Table Of Contents
- Before You Start
- Safety Notes
- Contents
- Getting Ready
- Operation Method
- Turn On / Off
- Set your Language, Date and Time after the first power-on
- LCD Screen Display
- Introduction to Basic Operation of Recording and Shooting
- LCD Screen Display under Playback Status
- Introduction to Basic Operation of Playback
- Introduction to the Setting Mode of Menu Options
- Menu Introduction
- Introduction to General Settings
- Introduction to Mode Settings
- Movie Settings Introduction
- Still Settings Introduction
- AP Settings Introduction
- Connecting the Camera with the Smart Device
- Smart Device APP Operating Method
- Connection Port Introduction
- Appendices
- Special Accessories
84
HDMI Connected TV Output
The product is capable of realizing movie and photo playback on a TV through HDMI.
The HDMI connection defaults to automatic connection mode.
Steps:
1. Open the rear cover of the product, connect one end of the HDMI cable (not included) to a
TV which is up to the HDMI standard (the TV and the product both need to be turned on)
and the other end to the cable to the HDMI port of the product;
2. The product will automatically enter the playback state after the connection is complete.
The operating method is the same as the 「Introduction to Basic Operation of Playback」
on page 31.
If the product is connected to the TV while in the off state, press and hold
and to
power on. The product will automatically enter the playback state.