User Manual
Table Of Contents
- Before You Start
- Safety Notes
- Contents
- Getting Ready
- Operation Method
- Turn On / Off
- Set your Language, Date and Time after the first power-on
- LCD Screen Display
- Introduction to Basic Operation of Recording and Shooting
- LCD Screen Display under Playback Status
- Introduction to Basic Operation of Playback
- Introduction to the Setting Mode of Menu Options
- Menu Introduction
- Introduction to General Settings
- Introduction to Mode Settings
- Movie Settings Introduction
- Still Settings Introduction
- AP Settings Introduction
- Connecting the Camera with the Smart Device
- Smart Device APP Operating Method
- Connection Port Introduction
- Appendices
- Special Accessories
91
Message Description Reset Mode
Connecting to the computer USB.
Connecting to the HDMI device.
The display is ended after
connection is succeeded.
Caution will appear before power off when the
battery of the product is already dead.
The rmware cannot be updated when power
is insufcient.
It will shut down after
displaying for 2 seconds.
A message appears to prompt
updating after full charging and
returning to the update screen.
The message will be displayed when the
temperature of the battery reaches 70 °C
during recording.
It will shut down automatically
in 2 seconds, and can be
recovered to use only after the
temperature is reduced.
When the AP setting is enabled, the message
will be displayed when the temperature of the
battery is in the range from 68 to 70 °C.
Return to the menu interface
in 2 seconds and recover use
only after the temperature is
reduced.