User Manual

34
Press and hold the
and buttons on the remote control simultaneously until pairing is successful.
While pairing, the remote control shall be closer to the camera.
1.2. Method of one remote control for multiple cameras:
In the main interface of camera, press the button, select , press the button, select “Multi Control", press the button to enter into channel
setup interface, select any one channel, press the button to enter into "Start Pairing?" interface, then, select , press the buttontoconrm.
Each camera must be set to the same channel (Channel 1~Channel 5) before
pairing. A remote control can control a maximum of 5 cameras at the same time.