User Manual

10
Mounting / Removing Lens Cover
Removing lens cover:
Turn the lens cover according to the illustrated direction until it separates from the
SP360.
Mounting lens cover
Turnandrmlytightenthelenscoveraccordingtotheillustrateddirection.
Thelenscoverprotectsthelensfrombeingdamaged(dustproof,shockproofandsplashproof).Usingthelenscoverwillnotinuencetheimageandvideoquality.
Before mounting the lens cover, make sure the lens surface is clean and dry. Always use a clean, lint-free dry cloth to clean the lens before shooting or recording so it
will not affect the photo or video quality.
When the SP360 is exposed to extreme temperature differences condensation may form inside of the lens cover. If this happens, remove the lens cover, and clean it
with a soft, dry, lint-free cloth, and then reinstall the lens cover.
IftheSP360willnotbeusedforaperiodoftime,alwaysputtheprotectivecoveronit.(asshowninthegure).