User Manual

13
Charging the Battery
PleaseusethebatterychargerorACadaptertochargethebatteryinanambienttemperaturerangingfrom10˚Cto35˚C.
Charging the battery with a battery charger:
1. Place the battery into the battery charger according to the direction illustrated. Use the Micro USB cable to connect the battery charger and the AC adapter, and then
plug the AC adapter into an electrical outlet.
2. The indicator light will turn red while charging. The indicator light becomes green means charging is complete.
Whenchargingthebatteryforthersttimeorafteralongperiodofstorage,pleasemakesurethatthechargingtimeisnolessthanfourhours.
Charging the Action Cam with an AC adapter or an external power supply (vehicle power supply, portable power supply, etc):
1. Place the battery into the Action Cam.
2. UsetheMicroUSBcabletoconnecttheActionCamtotheACadapterrst,thenplugtheACadapterintothepoweroutlet.Or,usetheMicroUSBcabletoconnectthe
Action Cam to an external power supply (vehicle power supply, portable power supply, etc).
3. "Charging ..." shown on the LCD screen indicates the battery charging has begun.
4. The indicator light will become orange while it’s charging. (The Action Cam will automatically shut down after charging is complete.)
Charging will stop after pressing down the button while charging.
If the Action Cam was set to the Loop recording mode before shutdown, it will automatically start up and start recording when a Micro USB cable is connected to the
Action Cam and an AC adapter (or to an external power supply). (For example: when the Action Cam is connected to a vehicle power supply, it will start and record
automaticallywhentheautomobilestarts.Itwillalsostoprecording,savetheles,andpoweroffoneminuteaftertheautomobileshutsdown.)