Installation Guide KODAK SSD X150 1
I. Preparation before installing the new disk The SSD being delivered without operating system, it is necessary: (a) Either to clone the original disk to copy it to the your new KODAK SSD X150 (b) Or to install an operating system on KODAK SSD after mounting it in the computer Choice a) Cloning the original disk to the new KODAK SSD X150 you have to connect both discs at the same time on your computer (fixed or portable). For that, you must have a USB 3.
Option b) Installing a new OS Important preliminary remark: To install Windows, you must have the Product Key of your version of Windows. See Microsoft Label on Computer or Microsoft License Agreement. First of all, backup all the data on your current disk onto an external medium, including: documents, images, videos, Internet favorites and saved passwords, contacts.
II. Steps to follow for the installation of the new disk 1 : Preparing the computer After turning off the computer, disconnect the Power supply cable. If the battery is removable disconnect it according to the computer’s manufacturer user manual.
2 : Remove the HDD Consult the computer’s manufacturer user manual to locate and remove the original HDD. In most cases, it is necessary to unscrew and remove the side or bottom panel. WARNING! Static electricity is potentially dangerous to the various electronics components of your computer during the installation of the SSD.
3 : Retrieve the HDD Bracket or Adapter If the original HDD has a bracket or adapter, disassemble it then attach it to the SSD. This support or this adapter may contain fastening screws. Consult the computer’s manufacturer user manual to properly attach the bracket or adapter to the SSD.
4 : Mounting the SSD in the Computer Insert the SSD into the PC at the original HDD slot according to the computer’s manufacturer user manual (fixing screws, disc locking by a mechanical system, etc.).
5 : Close Your Computer Close the PC and remount all components in their initial position in accordance with the manual. Plug in the cables (Power supply, Network, Display, keyboard, etc...). Connect the battery, then the power supply cable.
