Instruction Manual

Using the advanced features
www.kodak.com/go/z1085support 21
■ Larger f-stop numbers indicate a smaller lens opening; keeps the main subject
sharp; good for landscapes and well-lit conditions.
Shutter speed—control how long the shutter stays open.
Exposure Compensation—adjust the exposure; good for controlling backlit or
non-standard scenes. If the picture is too light, decrease the setting; if it’s too dark,
increase the setting.
ISO speed—adjust the camera’s sensitivity to light. Higher ISO indicates greater
sensitivity. ISO 8000 is available only in 3.1 MP and lower picture size.
NOTE: A higher ISO may produce unwanted grain or “noise” in a picture.
Focus mode—select a large or concentrated area of focus.
Focus mode Description
Normal AF
Focus setting for general picture-taking.
Macro
Sharpness and detail in pictures at close range. Use available light instead
of flash, if possible. The camera automatically sets the focus distance
depending on the zoom position. The close-up distances are:
Wide angle: 7.9–27.6 in. (0.2–0.7 m)
Telephoto: 19.7–39.4 in. (0.5–1.0 m)
Infinity
Distant subjects. Auto-focus framing marks are unavailable.
Manual
Focus is at center position. When MF icon appears, press OK to display
focus indicator. Press
to adjust the setting. A magnified image
appears on the screen when adjusting focus position.
urg_00831.book Page 21 Friday, May 23, 2008 12:03 PM