P20 Zoom Flash Zoom Flash P20 P20 Zoomblitz Flash con zoom P20 Flash externo P20 Flash Zoom P20 User’s Guide Guide d'utilisation Benutzerhandbuch Manuale per l'utente Guía del usuario Guia do usuário 4J3974
Do not operate the unit in extremely humid environments, such as a bathroom or near a humidifier. This may result in a fire, electric shock, or injury. CONTENTS Important Safeguards ....................... Features and Functions .................... Overview ........................................... Installing the Batteries....................... Mounting the Flash to the Camera.... Flash Charging Status ...................... Power Save and Automatic Shutdown ........................................
INSTALLING THE BATTERIES OVERVIEW The flash uses two 1.5V AA batteries (not included) and is compatible with alkaline, NiMH, oxy-alkaline, and most AA rechargeable batteries. We recommend using Kodak NiMH rechargeable digital camera batteries when possible. 1. Slide the power switch to the “OFF” position. Flashtube Housing 2. Open the battery compartment by sliding the battery door back slightly toward the rear of the unit to unlatch it, then flipping down the door. Battery Door 3.
MOUNTING THE FLASH TO THE CAMERA subject or set the camera to Aperture Priority mode and select a larger aperture (smaller f-number). 1. Slide the power switch to the “OFF” position. • Manual mode—the amount of flash is adjusted manually, with Power Ratio settings of 1/1 (full emission), 1/2, 1/4, 1/8 or 1/16 power. Use the Mode button to toggle through the settings. 2. Slip the flash unit onto the camera’s hot shoe. Turn the knurled lock ring to firmly affix the flash unit.
ADJUSTABLE BOUNCE FLASH HEAD The P20 flash includes a head that lets you position the light in a number of vertical positions, in all exposure modes. For more pleasing and creative lighting effects, such as softening harsh shadows on a subject, the Bounce Flash Head is adjustable vertically up to 90 degrees, with stops at 45, 60, and 75 degrees. CAUTION Do not attempt to force the head beyond the available settings, or damage to the flash unit will occur. Direct Flash Bounce Flash 1.
TECHNICAL SPECIFICATIONS TROUBLESHOOTING Power Zoom Problem Solution Flash doesn't fire Clean hot shoe area; remove any dust or dirt. Make sure flash is securely fastened to camera—is knurled ring tight? No power Make sure batteries are charged and positioned properly. Color Temperature Flash Duration Operating Temperature Dimensions Weight Automatic setting – Signal from camera Manual setting – Pressing the Zoom button 5600 K ±400 K at full power output 1/800 sec.
