Instruction Manual

i
To prevent the risk of personal injury or damage to the equipment, the following
safety symbols are used to indicate safety-related information. Insure that you clearly
understand the meanings of the symbols BEFORE using the equipment.
Symbols Used in Manual
This indicates a very dangerous procedure that could result
in serious injury or death if not performed properly.
This indicates a hazardous procedure that could result in
serious injury or death if not performed properly.
This indicates a hazardous procedure or danger that could
result in light-to-severe injury, or that might damage the
equipment, if proper precautions are not taken.
Safety Symbols Used on Equipment
The following safety symbols are used inside or on the equipment near operation lo-
cations to provide information about safety items and operation precautions. Insure
that you clearly understand the meanings of the symbols and take the necessary pre-
cautions BEFORE using the equipment.
This indicates high voltages with a risk of serious electric shock if the part
is touched. NEVER touch the part with bare hands, etc.
The symbol prohibits the operation shown inside the symbol. (The ex-
ample in the left prohibits disassembly.)
The symbol indicates that the operation inside the symbol is potentially
hazardous. (The example on the left indicates that the plug should be held
when disconnecting it from the AC outlet.)
This indicates the ground (earth) terminal. If the equipment cannot be
grounded via the power cord, connect this terminal to ground. There is a
risk of serious electric shock if the equipment is not grounded.
RA40C/RA41C/RA42C
Marine Radar
Instruction Manual
21st Jul. 2000 (1st Edition)
Document: E-A40C/41C/42C-2-00
Safety Symbols
DANGER
!
WARNING
!
CAUTION
!