User Manual

(3) Fuse

The fuse is in-line type, built in

to the power supply cable. If the fuse

appears to be blown, check the fuse. If

blown, replace it following the

procedure shown in Fig.6-2.

Fig. 6-2 Method for replacing fuse

Note: Before maintenance of scanner, you can hang a radome (upper) using cord through hole as fol-

lows.

Fig. 6-3 Method for replacing fuse

Fixing screw

Hole

A: Top view

Cord

Radome(Upper)

Radome(bottom)

Push

Power supply cable

Wire(White)

Turn counterclockwise

and pull

Fuse

Spring

Push and turn clockwise

Replace new fuse

To display unit