User Manual

(3) A small cross cursor and the prompt "SET ZOOM POINT" will be displayed on the screen center and at

the bottom respectively.

(4) Use the cursor keys to move the cross cursor to the point to be magnified, and press the "ENT" key to

complete the setting. The area around the cross cursor is displayed in 2x magnification, with blinking

"ZOOM" displayed in the upper right corner of the screen, indicating that a ZOOM display is shown.

(5) To cancel the ZOOM function, select OFF in step (1) or begin operation of range.

Up/Down → ENT → Up/Down (Select ON) → ENT → Up/Down & Left/Right → ENT ZOOM

Setting

(Select ZOOM) | (Move cross cursor)

|→ (Select OFF) → ENT ---------------------------------------ZOOM canceled

Note 1) VRM2 and EBL2 do not follow the ZOOM function during they are floated.

Note 2) Normal screen returns when you change the range scale.

Note 3) ZOOM function is usable only in PPI screen mode.

Note 4) ZOOM function is unusable in OFF-C.

Note 5) The ZOOM center can be set any desired position within the set range.

5.5.3.8 Increasing the sensitivity (S/L)

The pulse length is automatically changed as you change the range scale. However, if you wish to in-

crease the sensitivity or to improve the picture definition, change the pulse length according to your need. If

you select the short pulse (SHORT), the picture will become more definite, giving higher range discrimina-

tion. If you select the long pulse (LONG), the picture will be stretched towards range, providing better rec-

ognition of the targets shown, in contrast, the range discrimination will be sacrificed.

(1) Use the up-down cursor keys to select S/L from among the pull-down display items, and press the "ENT"

key.

(2) Select Pulse length (SHORT or LONG) using the up-down

cursor keys from the SHORT/LONG display beside the

S/L item.

(3) The setting will be completed when the “ENT” key is

pressed after the selection.

Up/Down → ENT →(Select SHORT) → ENT ------------------------- Set to short pulse

|→(Select LONG) → ENT -------------------------- Set to long pulse

.75

.25

HU S

S or L display

.75

.25

SET ZOOM POINT

.75

.25

ZOOM

blinking "ZOOM"