User Manual
60
5.5.4 SETUP Menu 
Using this menu, you can select and set up the following picture presentation modes: 
(1) PPI:  A basic presentation mode composed of a complete PPI screen, with 
  status displays on the left side, and an array of the soft keys on the right 
  side of the screen. 
(2) SEMI3D/PPI:  A small complete PPI on the left side and a semi-3D screen on the right  
  side. 
(3) PPI/PPI:  Two small complete PPI screens on both sides, with the status display 
  and the soft keys at the bottom and in the right side, respectively. 
(4) PPI/NAV:  A small PPI screen on the left side and the NAV information on the right 
  side. The status display and an array of the soft keys are positioned at 
  the bottom and in the right side of the screen, respectively. 
(5) ALL PPI:  A single, largest PPI screen is shown. The top and the bottom parts of 
  the PPI screen are truncated, while the right and left sides of PPI are 
  fully displayed. 
(6) ALL PPI/PPI:  Two larger PPI screens with truncated bottom. 
(7) MOB:  A Nav display, showing the position of MOB (Man Over Board) and 
  present ship’s position in latitude and longitude coordinate. 
<Common operations for the SETUP menu> 
 (Up to the point when "SETUP" menu is selected from the main menu) 
Press the "MENU" key and select "SETUP" from the displayed 4 main menus using the left-right 
cursor. (The contents of the selected MENU will appear on a pull-down display in accordance with the 
movement of the left-right cursor.)  
MENU  
→
  Left/Right   
  (Select SETUP) 
Further explanation about the SETUP menu will be conducted on the assumption that this "common 
operation for the SETUP menu" has already been completed. 
5.5.4.1 Selecting and setting up the screen mode (WINDOW) 
(1) Use the up-down cursor keys to select WINDOW from among the pull-down display items, and press the 
"ENT" key. 
(2) Select a screen to be displayed with the up-down cursor keys from among the above 7 items shown beside 
the WINDOW item. 
(3) The setting will be completed when you press the "ENT" key after the selection. 
MARK
 WINDOW >
SEL WIN  > 
PICTURE  > 
SYSTEM CHECK
CUSTOM  > 
. 75
.25
HU 
NAV
ECHO 
SETUP 
SEMI3D / PPI 
PPI / PPI 
PPI / NAV 
ALL PPI 
ALL PPI/PPI 
MOB 
 PPI 
SETUP
>>>
 0.23NM
AT










