User Manual

63
b) Adjusting GAIN of LEFT screen.
1) When the RIGHT range indicator is displayed reverse, use the "SEL WIN" function to make the
LEFT screen to be active.
2) Press the "GAIN" key and the letters "G50" will be displayed in reverse, indicating the GAIN
adjustment is available.
3) Adjust GAIN with the rotary control.
Adjust STC and FTC in the same manner as GAIN.
Note: While the adjustment of GAIN, STC, or FTC is in process, the radar picture update will be
frozen. In approximately 5 seconds after the adjustment, the radar picture update will be
resumed.
c) Using VRM1 on LEFT screen.
1) When the RIGHT range indicator is displayed in reverse,
change the active screen to LEFT screen with "SEL
WIN" function.
2) Press the "VRM1" key and " " will be displayed in
reverse, indicating the VRM1 is available.
3) Rotate the rotary control to measure the distance.
4) The same procedure applies to VRM2, EBL1, or EBL2.
NOTE: To use the VRM1 on the RIGHT side screen, first
switch the active display to RIGHT side, then press the
VRM1 key.
(d) PPI/NAV Screen
Note: The ZOOM, OFF-C, FL EBL2, and FL VRM2 are
not available in this screen mode.
(e) ALL PPI Screen
Note1: The status display such as RANGE, RINGS interval, and
Display mode are displayed in the upper-left corner of
the screen.
Note2: When you press any key except "MENU", "RANGE
UP/DOWN", "BRILL", and "POWER", the screen will
return to the PPI mode.
1 0.00NM
G 55/35
S 35/AT
F 35/AT
1 0.00NM
Determining the distance with VRM1
on LEFT screen
.75
.25 HU S
6
1
+
+
NAV DISPLAY
WAY P 123.4°
6.8
NM
COURSE 2.38
NM
XTE <<<
HDG 267.3°T
SPD 12.8
KT
TEMP 20.8°
C
DEPTH 58.3
M
LAT/LON
34°08. 22N
138°02. 53E
PPI/NAV screen
.75
.25 HU S
+
. 75
. 25
HU S
ALL PPI screen