User Manual

69
(4) To complete the settings
After you have finished the settings, press the ENT key to exit from KEY ASSIGNMENT.
Example of an operation
(The process up to the selection of KEY ASSIGNMENT from the SETUP menu is omitted. Only the
process after the above chart will be described.)
Example 1) Changing the OFF-C function, allocated to key 6 in setting 2, to the HDG OFF function.
Up/Down → 6 → ENT ---------------Key 6 altered from
Select HDG OFF The display beside key 6 Exit from OFF-C to HDG OFF
changes to HDG OFF KEY ASSIGNMENT
Example 2) Re-allocate SEL WIN to key 1 in setting 2.
Left/Right → Up/Down → 1 → ENT Key 1 in setting 2
From SET1 Select SEL WIN SEL WIN is displayed is altered to SEL WIN.
to SET2 beside key 1. Exit from
KEY ASSIGNMENT
Example 3) Changing the ST function, allocated to key 1 in setting 1, to HDG OFF and then reset the
key 1 in setting 2 as SEL WIN.
Up/Down → 6 Key 6 altered from
Select HDG OFF The display beside key 6 ST to HDG OFF
changes to HDG OFF
Left/Right → Up/Down → 1 → ENT Key
Select SEL WIN SEL WIN is displayed Exit fromis altered to SEL WIN
From SET1 beside key 1. KEY ASSIGNMENT
to SET2