User Manual

70
5.5.4.5.2 Changing the content of settings 1(PRESET1)
(1) Select PRESET1 from CUSTOM items and then press the "ENT" key to show the PRESET1 screen
(See chart below).
(2) Select the item with up or down key and then contents with left or right key.
The selected item will be enclosed by a rectangular and the contents will appear in reversed display.
(a)
Repeat the above procedures for the rest of settings.
(3) After the setting is completed, exit from the PRESET1 screen with the "ENT" key.
Note) The contents will be displayed in (b) together with the numbers selected in P TABLE.
a) HM Flash ON/OFF To Set up HM presentation mode, either FLASH or
CONTINUOS.
ON: Heading Mark flashes every time the antenna is directed
to ship’s bow.
OFF: Heading Marker is continuously shown.
b) Stern Mark ON/OFF To turn ON or OFF the Stern Mark.
c) North Mark ON/OFF To turn ON or OFF the North
Mark.
d) ST'BY screen To set up the stand-by screen
mode as follows:
NAVI: Navigation Data
screen
NOR: Normal screen
e) Buzzer Volume To set up audio sound level of
electronic buzzer
f) VRM Unit To select VRM distance unit
NM: Nautical mile
PRESET1
HM FLASH ON _OFF_
STERN M ON _OFF_
NORTH M ON _OFF_
ST’BY _NAVI_ NOR
BUZ VOL OFF LOW _HIGH_
RM UNIT _NM_ KM SM
TEMP
°
C_
°
F
DEPTH _M_ FT FM
EBL BRG _REL_ TRUE MAG
WP BRG _TRUE_ MAG
HEAD INPUT _NMEA_ SIN/COS 12BIT 10BIT
HEAD TRUE _MAG_
+MK MODE _DIST / BRG_ LAT / LON
P TABLE 0 _1_ 2
.5 .75 1.5 3 6
P TABLE _1_ SHORT 0 0 0 1 1
LONG 0 1 1 2 2
PRESS ENTER KEY TO RETURN
a) Heading Flash
b) Stern Mark
c) North Mark
d) ST'BY screen
e) Buzzer Volume
f) VRM Unit
g) Water temperature
h) Depth Unit
i) EBL Mode
j) WayPoint Mode
k) Heading Input
l) Heading Type
m) Cursor position
n) TX Pulse
(a)
(b)
Heading Marker
Stern Marker
.75
.25
HU