User Manual

73
j) Ship's Speed Own ship's speed setting
NMEA: The speed data fed from an external speed sencor
in NMEA sentence form.
MANU: MANUAL speed input set by an operator using
the rotary control.
LOG: The speed is calculated by log pulse. Set the pulse
rate with the rotary control.
k) On-screen Language To select the language used for MENU and SOFT KEY ( Note2: )
l) Scan Speed Scanning speed setting
STD: Standard
HIGH: High speed
( The setting can be changed in stand-by mode only. )
m) Color Video presentation switch
MONO: Yellow or Green monochrome
MULTI: Red to Green multi-color
Note 1: HOLD function
POWER = POWER key to press
The HOLD function is only available in standby mode that momentarily freezes the radar picture. In this
mode, you can use VRMs and EBLs and, as far as the operation continues the picture stays frozen. If you
leave these controls, the timer starts to count and after 30 seconds the screen will be put back automatically to
normal transmitting mode.
Setting HOLD POWER (Operation)
| | |
(Under Tx)
^
<-------Under HOLD mode--->
^
<-----------ST’BY DISPLAY--------------------------------
Turn to transmission off
EBL,VRM operation:X seconds X + 30seconds (Time used)
NOTE) EBL and VRM function is usable in HOLD state.
Note 2: 15 languages
CHI : Chinese KOR : Korean
DAN : Danish NOR : Norwegian
ENG : English POR : Portuguese
FRE : French RUS : Russian
GER : German SPA : Spanish
GRE : Greek SWE : Swedish
ITA : Italian TUR : Turkish
JPN : Japanese
ST’BY
HOLD
“HOLD” is displayed and blinks.
Tx OFF
X + 30sec.
Setting
HOLD
EBLs and VRMs can be used
to locate a target.