User Manual

24
3.7.2 Grounding wire
Connect grounding wire before connecting power
supply cable. Leakage current is too high.
Connect grounding wire from the grounding terminal on the rear panel of the display unit to the
ship's hull as shown below.
Fig.3-10 Grounding display unit to earth
Connect grounding wire from one of the bolts you have attached when installing the scanner unit to
the ship's hull as shown in Fig.3-11. (The crimp terminal and grounding wire are not included with the
radar equipment.)
Fig.3-11 Grounding scanner unit to earth
!
WARNING
Grounding wire
→
To ship’s hull
Scanner cover