User Manual

3
Installation
Only qualified personnel should install the radar system in order to make sure proper radar performance
and operation.
To Customers
* To always use this equipment at its best condition, we recommend observing the operation and main-
tenance procedures in this manual from time to time. Further, try to operate the radar in good visibility
condition to make comparison between visual impression and the radar picture presentation of the
situation you are in. By doing this, you will be able to gain practical knowledge in interpreting the radar
picture as well as the false echoes and blind sectors caused by the masts or funnel of the ship. Note that
this equipment should only be used as a navigational aid and ship’s crew must make final decision on
ship’s maneuvering.
* In case of functional failure, immediately turn off the radar and switch off the ship’s main power supply at
the distribution switchboard. Inform your local service agent of the faulty situation to detail, where pos-
sible.
* This instrument uses crystal oscillators and a LCD backlight lamp, which are vulnerable to mechanical
shock. Take utmost care when handling these items
* The mercury (Hg) is used in the LCD backlight lamp. When you attempt to discard your radar, observe
the local code of practice for deposit.