User Manual

39
Operation_
_Soft Key Setting Example_
SET1 SET2 SET3 SET4
The function can be changed at the "KEY ASSIGNMENT" function in the "CUSTOM" menu of the "SETUP".
5.4.8 Erasing the Heading Marker temporarily (HDG OFF)
Press the “HDG OFF” key. The heading marker is turned off as long as you press and hold the key.
5.4.9 Using parallel cursors (///CSR)
Press the “///CSR” key. Parallel cursors will appear on the screen. As you rotate EBL, the parallel cursors also rotates
in synchronism with EBL.
To cancel the "///CSR" function, press "///CSR" key once more.
Note: Refer to "5.5.1.8 Using parallel cursors (///CSR)".
5.4.10 Establishment of the indication of the RANGE RINGS (RINGS)
Press the “RINGS” key. Range Rings will appear on the screen. To cancel the "RINGS" function, press "RINGS"
key once more.
Note: Refer to "5.5.1.9 Establishment of the indication of the RANGE RINGS (RINGS)".
5.4.11 ON/OFF of variable range function (VAR RNG)
The range scales are allocated as standard in steps of 0.5--0.75--1.5--3.0--.....(STEP mode), but using this function
you can set up the scaling to be more closely separated, such as 0.5--0.6--0.7--0.8--..... (CONTINUOUS mode).
Press the “VAR RNG” key. The VAR RNG function becomes valid and the sign VAR appears at the upper left side
of the screen (beside MODE). To cancel the "VAR RNG" function, press the VAR RNG key again.
To change the range scale in the CONTINUOUS mode, use the up-down cursor while the VAR RNG function is on.
To change the range scale in the STEP mode, press the "RANGE UP" or "RANGE DOWN" key.
If you press other keys, the relevant key function becomes effective with current VAR RNG function being acti-
vated.
5.4.12 Changing display modes (MODE)
(1) Select MODE from the pull-down display items using the up-down cursor keys, and press the "ENT" key.
(2) When the HU/HS/NU/CU/TM sign is displayed beside the MODE item, select display mode with the up-down cursor
keys and press the "ENT" key.
(3) The setting completes when you press the ENT key after the selection. (NOTE1,2)
Press the "MODE" key, the display mode will change on every press of the key to HU (Head Up), HS , NU, CU, TM
in order. The words MODE SELECT appear at the upper part of the screen. However, a setting will be needed for the
ship’s speed if TM is selected. Also, a heading or a course information is necessary for NU, CU and TM.
1
3
4
5
2
1
3
4
5
2
1
3
4
5
2
6 6 6
EBL1
VAR RNG
TRACK
TARGET
VRM1
EBL2
FL EBL2
FL VRM2
GZ
VRM2
DATA
ALL-DEL
TRACK
ZOOM
DEL
SEL WIN
OFF-C
PICTURE
7 7 7
NEXT
NEXT
NEXT
1
3
4
5
2
6
PPI
PPI/PPI
PPI/NAV
ALL PPI
PPI/3D
ALL PPI2
7
NEXT
7 7 7
NEXT NEXT NEXT
7
NEXT