User Manual

44
5.4.26 Change to PPI/NAV screen ( PPI/NAV )
Press the "PPI/NAV" key to change current screen mode to PPI/NAV
screen mode.
Note: The ZOOM, OFF-C, FL EBL2, and FL VRM2 can not be used in
this mode.
5.4.27 Change to ALL PPI screen ( ALL PPI )
Press the "ALL PPI" key to change the current screen mode to ALL PPI
screen mode.
Note:
(1) The range scale, rings interval and the display mode are shown in
the upper left corner of the screen.
(2) Return to PPI screen mode pressing a key except MENU, range UP
or DOWN, or POWER key.
5.4.28 Change to ALL PPI/PPI screen ( ALL PPI2 )
Press the "ALL PPI2" key, the screen will change to ALL
PPI/PPI screen.
Use to change the screen from other modes to ALL PPI/PPI.
Note:
(1) The range, rings interval, display mode are displayed on the upper
left of each screen.
(2) Return to PPI/PPI screen mode pressing a key except MENU,
range UP or DOWN, or POWER key.
(3) Each radar picture is refreshed alternately. Right screen
picture is held frozen while the left screen is updated, and vice
versa. The picture update is therefore taking place every 2 antenna revolutions. When your ship navigates at
high speed, use the PPI screen mode to allow fast refreshing pictures.
5.4.29 Canceling target tracking (DEL)
To cancel tracking, use the DEL (delete) function. The number highlighted on the upper right of the screen will
disappear. If ALL DEL (delete all) is selected, the ATA will cancel tracking of all targets.
Press the soft key if the DEL function has been set.
When operating from the MENU, place the cursor on NAVI/DEL and press the ENT key. When the radar is set to the
SY'BY mode, the ATA will cancel tracking of all targets.
5.4.30 Canceling all target tracking (ALL DEL)
To cancel tracking all target, use the ALL DEL (All delete) function. The number highlighted on the upper right of
the screen will disappear.
Press the soft key if the ALL DEL function has been set.
When operating from the MENU, place the cursor on NAVI/ALL DEL and press the ENT key. When the radar is set to
the SY'BY mode, the ATA will cancel tracking of all targets.
5.4.31 Data display (DATA)
When necessary, numerical data of the current tracking target can be displayed in the data display window. Use
the DATA function to display the numerical data of the number highlighted on the upper right corner of the screen.
Press the soft key if the DATA function has been set.
.75
.25 HU s
+
NAV DISPLAY
WAY P 123.4°
6.8
NM
COURSE 2.38
NM
XTE <<<<
HDG 267.3°T
SPD 12.8
KT
TEMP 20.8°
C
DEPTH 58.3
M
LAT/LON
34° 08. 22N
138° 02 .53E
PPI/NAV screen
.75
.25
HU
+
ALL PPI
screen
.75
.25 HU S
.25 .
125
+
ALL PPI/PPI
screen