Instruction Manual

14 RA51/52/53/54/55 INSTRUCTION MANUAL – 05
Fig.3-5 Mounting the Scanner
Tab.3-6 Bolts for Mounting Scanner Unit (Radome scanner)
Tab.3-6-1 Bolts for Mounting Scanner Unit (Open scanner)
Thickness of
mount base
Bolts necessary to
fix radome scanner
Material Remarks
1-4mm(0.04-0.16 in.)
M10
×
15 (1.5mm pitch)
Stainless
4-9mm(0.16-0.35 in.)
M10
×
20 (1.5mm pitch)
Stainless
9-14mm(0.35-0.55 in.)
M10
×
25 (1.5mm pitch)
Stainless Included with radar
14-19mm(0.55-0.75 in.)
M10
×
30 (1.5mm pitch)
Stainless
Thickness of
mount base
Bolts necessary to
fix radome scanner
Material Remarks
1-4mm(0.04-0.16 in.)
M12
×
45 (1.5mm pitch)
Stainless
4-9mm(0.16-0.35 in.)
M12
×
50 (1.5mm pitch)
Stainless
9-14mm(0.35-0.55 in.)
M12
×
55 (1.5mm pitch)
Stainless Included with radar
14-19mm(0.55-0.75 in.)
M12
×
60 (1.5mm pitch)
Stainless
Fix four screws
RA51 Radome scanner
RA52/53/54/55 Open scanner
Fix four screws
Mount base
Washer
Spring washer
M10 Hexagonal bolt
Radome(bottom)
Chassis
Included
Double nuts
Spring washer
Washer
M12 Hexagonal bolt
Mount base
Scanner base
Ship's
heading
Cable inlet
Logo seal on
side wall
Ship's
heading
This place
was cut.
Note: See Fig.3-11