User's Manual

Chapter 3 How to use the system menu MDC-2000A Series
3-7 0093120007-01
3.4 NMEA
In the NMEA item of the system menu, the
transmission speed of the external input/output
can be changed.
Match the transmission speed with that of the
external connection equipment.
1 Press the [MENU] key.
2 Move to the system menu.
Refer to 3.1 Display of System Menu.
3 Select [NMEA] → [CH1 (J4)] or [CH2 (J5)].
Select the connector of which the
transmission speed is changed.
4 Change the setting of transmission speed
with the [ ] and [ ] keys.
5 Press the [ ] key to display the NMEA
monitoring menu.
If the external equipment is connected at the
correct transmission speed, the received
NMEA sentence is displayed.
For the NMEA sentence, refer to 5.6
List of Input/Output sentence.
Connection with the KODEN GPS
compass
Incase KGC-1/KGC-222 is connected to CH2
(J5), the best performance can be achieved by
executing [KGC-1 SETTING],
1 Press the [MENU] key.
2 Move to the system menu.
Refer to 3.1 Display of System Menu.
3 Select [NMEA] → [KGC-1 SETTING], and
press the [ ] key.
4 Press the [ENT] key.
5 Select [Yes] with the [ ] and [ ] keys.
6 Press the [ENT] key.
Both the Display unit and the KGC-1/KGC-222
are properly set.
The HDT, GGA and VTG signals are outputted
from the KGC-1/KGC-222, and baud rate is set
to 38,400.
3.5 Preset
In the Preset of the system menu, the radar is
customized.
F1/F2 Key Set
Select the function assigned to F1 and F2 keys.
Select Range S/M/L
Select the range to be set with the [- RANGE +]
key.
Echo Color Set
Set an arbitrary color to the video color.
Trail Color Set
Set an arbitrary color to the trail color.
Display Color Set
Set an arbitrary color to the color of cursor and
numerals.
Language Select
Select the language used in the menu.
NAV Display Select
When [DISPLAY SELECT] is set to [PPI/NAV],
set the content to be displayed on the NAV
display.
Camera Position Correction
The CCD camera video displayed by pressing
the [STC] knob may be shifted.
By performing [CAMERA POSITION], the display
position of CCD camera video can be corrected
in the upper and lower directions.