User's Manual

Chapter 5 Installation MDC-2000A Series
5-10 0093120007-01
5.3 Display Unit Installation
The Display unit can be installed on the desktop or as flush mount.
Please install the Display unit to the following procedure.
In addition, please install the Display unit securing safety distance from the magnetic compass.
Safety Distance from Magnetic Compass
Standard Compass Steering Compass
1.2m 0.8m
Desk-top Installation
(1) Remove two knob bolts fixing the Display unit to the bracket.
(2) Remove the Display unit from the bracket and place it on the stable flat place.
(3) Place the bracket on the position where the Display unit will be installed and fix the bracket with
five 5 mm screws.
(4) Place the Display unit on the installation bracket and fix the Display unit with two knob bolts
removed in step 1.
Unit: mm (inch)
Knob bolt
(
2
p
cs
)
Display unit
Installation bracket
M5 screw (5pcs)
Washer (2pcs)