User's Manual

MDC-2000A Series Chapter 5 Equipment
0093120007-01 5-17
Connection of CCD Camera (J6) (Prepared by a user)
The optional product CW-405-0.3M is equipped with a RCA jack for connection to the CCD camera
(NTSC/PAL/SECAM), Connect the video output terminal (RCA plug (In most cases, yellow)) of your
CCD camera. Perform the waterproof treatment on the junction of the RCA terminal with a self-fusion
tape.
5.6 List of Input/Output Sentence
Input Sentence
The sentences shown on the table below can be received.
In NMEA0183 Ver. 1.5, 2.0 and 3.0, inputting is possible.
Information Priority of Sentence
Latitude/Longitude GGA > RMC > RMA > GNS > GLL
Heading HDT > HDG > HDM > VHW > RMC > RMA > VTG
Ship speed RMC > RMA > VTG > VHW
WPT BEC > BWC > BWR > RMB
Cross Track Error RMB > XTE
Wind direction MWV > MWD
Wind speed MWV > MWD
Water depth DPT > DBT
Water temperature MTW
Output Sentence
The TTM and TLL sentences can be transmitted.
Outputting is performed in NMEA0183 Ver. 2.0.
Sentence Information
TTM* Target Information
TLL** Target Position
* To output the TTM sentence, the ATA board (optional) is required.
** To output the TLL sentence, the latitude and longitude data and the bearing signal data are
required.
RCA jack (Yellow)