User's Manual

Chapter 4 Target (AIS, TT and Trial manoeuvre) MDC-7000P/7900P Series

0093169006-05E 4-24

TEST TGT ON

By turning TEST TGT [ON], a large character [X] is displayed at the lower middle of the display center.

A small character [x] is displayed in Target position.

Turn on TEST TGT, and start transmission. Then, range scale changes to 12NM automatically, and a

test target appears under the small character [x] position.

A test target appears near the direction 10° and range 12NM. After approaching to own ship, the target

moves toward direction 207°.

Own ship's speed is about 42kn and the test target speed is about 32kn (Relative speed is 74kn).

Turn ON TEST TGT.

1 Press MENU key to display “Menu”.

Select [TARGET] => [TT] => [TEST TGT] => [ON], and press ENT key.

Range scale will change to 12NM automatically.

During [TEST TGT] operation, range scale is fixed at 12 NM and cannot be changed.

2 Press STBY / TX key to start transmission.

12NM

2NM

12NM

2NM