User's Manual

MDC-7000P/7900P Series Chapter 4 Target (AIS,TT and Trial manoeuvre)

0093169006-05E 4-29

 TEST TGT ON

By turning TEST TGT [ON], a large character [X] is displayed at the lower middle of the display.

A small character [x] is displayed in Target position.

Turn on TEST TGT, press STBY / TX key, and start transmission. Then, a target appears.

A target appears near the direction 10° and range 12 NM. After approaching to own ship, the target

moves toward direction 207°.

Own ship's speed is about 42 kn and the target speed is about 32 kn (Relative speed is 74 kn).

Target

12NM

1 Press MENU key to display “Menu”.

Select [TARGET] => [TT] => [TEST TGT] => [ON], and press ENT key.

Range is fixed at 12 NM and cannot be changed.

2 Press STBY / TX key to start transmission.