User's Manual

MDC-7000P/7900P Series Chapter 4 Target (AIS,TT and Trial manoeuvre)

0093169006-05E 4-31

 Manual acquisition TT (ARPA)

1 Use a trackball to move cursor to the target and press ACQ key.

2 Symbol will be displayed by acquisition.

Information of symbol with

is displayed in the “TGT INFO” area.

CPA/TCPA are displayed as [missing] until tracking is started.

Move the cursor on symbol and press ENT key, if

is not displayed yet.

TGT INFO area

3 Confirm that data is changed from [missing] after the symbol is changed to tracked one.

4 Move the cursor again.

Delete the tracked symbol by pressing ACQ key while keeping OFF key pressed.