User's Manual

MDC-7000P/7900P Series Chapter 6 Map operation
0093169006-05E 6-5
1-1
1-2
1-3
1-4
1-5 1-6
1-1
1-2
1-3 1-4
1-5
1-6
Curs or
1-1
1-2
1-3 1-4
1-5
1-6
Cur s or
How to move
(1) CURSOR OPERATION
1 Press MENU key to display “Menu”.
Select [MAP] => [COAST LINE] => [MOVE] => [CURSOR] => select [1 to 10] => [GO], and press
ENT key. Numerical number is displayed each points of coast line.
2 Move cursor on editing and moving cursor data.
Press ACQ key. Circle mark will be displayed on the selected coast line and numerical data is
shown at coast line info area.
3 Move cursor to new position, then press ENT key.
4 Press MENU key to exit MOVE operation.
(2) BLOCK NUMBER OPERATION
1 Press MENU key to display “Menu”.
Select [MAP] => [COAST LINE] => [MOVE] => [BLOCK NUMBER] => select [1 to 10] =>
Following input menu is displayed.
2 Select [NUMBER] => NUMBER data screen is displayed. => select [1 to 100] =>
Press ENT key. Selected number’s numerical data is shown.
3 Edit data of LAT, LON, COLOR and DIVIDE.
4 Select [SET] and press ENT key to save input data.
NUMBER 1
LAT 35˚ 15.368N
LON 139˚ 51.129E
COLOR
DIVIDE OFF
SET