User's Manual

Chapter 9 Simple fault diagnosis MDC-7000P/7900P Series
0093169006-05E 9-10
Alarm list
List of system alarm and message.
Category
Priority (A: ALARM, W: Warning, C: Caution)
ID number (0-9999: IMO, 10000-9999999: Maker)
Instance number
ALR number
Contents Cause
A W 190 1 57 AIS targets exceed the
limit.
Number of AIS targets exceeding the
maximum 900 has been input.
A W 190 2 54 Tracked targets exceeded
the limit.
Number of tracked targets in TT (ARPA)
exceeded the maximum 100.
A W 190 3 56 AIS input targets
exceeded the limit.
Number of AIS targets exceeding the
maximum 900 has been input.
B C 190 4 58 AIS targets overload.
(95%)
Number of AIS targets being input
exceeded 855.
B C 190 5 55 Tracked targets overload.
(95%)
Number of tracking targets exceeded 95.
A A 191 1 3 Tracked target exceeded
the CPA/TCPA limit.
Tracked target has turned into dangerous
target.
A A 191 2 8 AIS target exceeded the
CPA/TCPA limit.
AIS target has turned into dangerous
target.
A W 192 1 4 Tracked target entered
into the guard zone.
Tracked target has entered into the guard
zone.
A W 192 2 5 Auto acquisition of a radar
target.
Captured a target entered into auto
acquisition area.
A W 192 3 9 AIS target entered into the
guard zone.
AIS target entered into the guard zone.
A W 192 4 10 Auto activation of an AIS
target.
A sleeping target has been activated.
A W 193 1 1 Tracked target is lost. TT (ARPA) has been lost.
A W 193 2 7 AIS target is lost. AIS target has been lost.
A W 193 3 2 Ref tracked target is lost. Ref tracked target has been lost.
B W 194 1 22 HDG is unavailable. THS or HDT are not inputted.
B W 194 2 23 SDP is unavailable. VBW, VTG, RMA or RMC are not inputted.
B W 194 3 24 COG/SOG is unavailable. COG/SOG is not inputted.
B W 194 4 25 SET/DRIFT data is
unavailable.
VDR is not
inputted.