User's Manual

ManualsBrandsKoden Electronics ManualsElectronicsX BAND MARINE RADAR

Chapter 1 Display and Operation MDC-7000P/7900P Series

0093169006-05E 1-10

1.3 Menu usage

Turn MENU on and off

1 Press MENU key, “Menu” display on the right side of the display.

2 “Menu” display is turned off by pressing MENU key again.

Select menu item

1 Press MENU key and “Main menu” will show on the display. Select one of main menu items by

moving the trackball up or down.

2 Move the trackball to the right after making selection in main menu and the sub menu will show on

the display.

3 Select a sub menu item by moving the trackball up or down.

4 Move the trackball to the right after making selection in sub menu and value of selected item will

show.

5 Select desired value, then press ENT key.

Note: Pay attention that ENT key must be pressed for selected item to take effect.

6 Move trackball to the left to return to previous menu.

To exit from menu, press MENU key again.

Note: “Menu” setup value is stored in the non-volatile memory inside the radar. Therefore, no setup

operation is required after power is turned on.

ECHO >

TRAIL >

DISPLAY >

ALARM >

TARGET >

NAV TOOL >

MAP >

BRILL >

SYSTEM >

MAINTENANCE >

>ECHO

PICTURE MODE

PICTURE1

PROCESS

OFF

EXPANSION 2

IR OFF

VIDEO CONTRAST 3

NOISE REJ OFF

COLOR REJ OFF

PULSE WIDTH >

SART OFF

PICTURE RESET >