User's Manual

MDC-7000P/7900P Series Chapter 2 Radar Basic Operation
0093169006-05E 2-3
2.3 Transmission
Transmission ON
After preheating time countdown is completed, the radar can be placed in transmit mode.
Press STBY/TX key, or select the STANDBY box at the upper left corner of the display using trackball
and press ENT key.
Radar system will start transmission.
The status of STANDBY changes to TRANSMIT.
Transmission OFF
Press STBY/TX key, or select the TRANSMIT box at the upper left corner of the display using trackball
and press ENT key to stop transmission.
The status of TRANSMIT returns to STANDBY at upper left of the display.
Operation of STBY/TX key
Operation of trackball