User's Manual

MDC-7000P/7900P Series Chapter 2 Radar Basic Operation
0093169006-05E 2-47
2.33 Performance monitor
Performance monitor is a function to confirm performance degradation such as aging phenomena etc.,
by recording performance of antenna on its installation or on exchange of antenna parts.
Note: Carry out initial setup without failure on its installation or on exchange of antenna parts.
Confirmation method for degradation of Antenna performance after operation
1 Press MENU key to display “Menu”.
Select [SYSTEM] => [MON] => [ON], and press ENT key.
Range is changed to 24NM automatically.
2 Confirm SYSTEM bar value.
Please contact with our sales agent or our sales department when SYSTEM bar becomes a half
(–10dB) or less in length, because there is a possibility of large performance degradation.
When contacting, please let person in charge know about degradation rate of TX and RX bars.
3 Select [SYSTEM] => [MON] => [OFF], and press ENT key.
Initial setup methods: Refer to Installation manual.