User's Manual

Chapter 2 Radar Basic Operation MDC-7000P/7900P Series
0093169006-05E 2-50
A
B
CD
dx
dy
OUTLINE
A 0 − 511m
B 0 − 511m
C 0 − 63m
D 0 − 63m
ANT OFFSET
dx -63 − 63m
dy -511 − 511m
CCRP
p
osition
ANT
position
2.35 Setup own ship outline
Set up own ship outline and antenna position from CCRP (Consistent common reference point).
Setup CCRP number and ship outline
1 Press MENU key to display “Menu”.
Select [NAV TOOL] => [SHIP OUTLINE] => [CCRP] => select CCRP number (1 to 4), and press
ENT key.
2 Select [OS PROFILE] => and after selection.
This setup is to designate ship’s outline and antenna location of CCRP.
To show own ship outline, turn on ship outline menu.
1 Press MENU key to display “Menu”.
Select [NAV TOOL] => [SHIP OUTLINE] => [SHIP OUTLINE] => [ON], and press ENT key.
If ship's width (C+D) is less than 10m, then even 0.125NM range will not show own ship outline.
CCRP number (1 to 4)